I have multiple sets of Copper head gaskets for FE engines.
If you have a block that has been decked below zero
or have a set of heads that have been milled to death
These will help to allow you to get the compression back to a streetable range
PBM brand gaskets
2 gaskets per package
Brand new unopened packages

Summit sells similar gaskets for between 202 dollars to 345 dollars

Price includes shipping in the lower 48 states...125 dollars per set shipped

The sizes are as follows
4.135X.072...2 sets
4.155X.042...1 set
4.200X.072...2 sets
4.250X.062...1 set
4.250X.072...1 set
4.330X.052...2 sets
4.330X.062...1 set

The first set of rods


C6AE-E.....SOLD
Freshly reconditioned on big and little end
NEW Childs and Alberts rod bolts
Good balance pads
500 Dollars shipped.....

Second set

C6AE-E rods
Freshly resized on big and little end
ground and polished
Shot peened
3 rods were drilled for pinned bearings at  one time
Aftermarket bolts looks like someone used the wrong sockets and chewed up the heads
Bolts still torque correctly
425 Dollars shipped


3 NOS Lemans rods    SOLD

C6AE-E rods
Have SCJ bolts in them
90 dollars a piece plus shipping

Any body got a serious interest in buying a Running 428 and a big IN big OUT Toploader 4 speed....The Thunderbolt Tribute car that this is sitting in is a running driving car..... The engine and trans will be pulled out as soon as it is paid for......The seller is pulling the engine and installing his All Aluminum 511 Fe engine and C6 trans...The engine is located 15 minutes from gateway raceway in madison Il ....Engine trans ,shifter,scattershield,clutch Everything from the water pump to the tailshaft is included...This is for a buddy of mine PM your number and I will forward them in the order that I get them ....6500 dollars Try and beat that price any where on the net

Located just minutes from St Louis Mo

I know it is a pretty generic add but some of the numbers I have are
65 date coded C6ME A scratch block
1U crank
C6AE-C rods
New pertronics
The heads are plain jane FE heads
Hydraulic cam
cast iron intake
Lakewood scatter shield
SFI flywheel
Centerforce clutch
Big IN Big Out RUG-AJ toploader

You can go for a ride in the car and see how it runs and shifts
The engine is due to be pulled out in the next couple of weeks or sooner if he has a cash buyer