FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: XR7 on May 24, 2023, 11:02:45 AM

Title: WTB: solid roller cam
Post by: XR7 on May 24, 2023, 11:02:45 AM

Looking for a "big" solid roller cam for a back-up engine, while the other engine is in machine shop jail. Anyone have a new or used cam on the shelf they don't need? Thanks.

Title: Re: WTB: solid roller cam
Post by: Jb427 on May 24, 2023, 11:13:29 AM

258-264@50 108 704 big enough?

Title: Re: WTB: solid roller cam
Post by: Fordman on May 24, 2023, 12:12:05 PM

I have a chet herbert NIB never installed 260/270 .730 lift solid roller cam

Title: Re: WTB: solid roller cam
Post by: XR7 on May 24, 2023, 03:04:22 PM

Looking for bigger than these on both lift and duration. Thanks though, and keep them coming!

Title: Re: WTB: solid roller cam
Post by: dozz302 on May 27, 2023, 07:20:23 PM

What specs are you wanting?

Title: Re: WTB: solid roller cam
Post by: Barry_R on May 31, 2023, 05:36:23 AM

Looked, but most of my stuff is old EMC sticks intended for 1.9 rockers.
No duration and very aggressive lobes.
I should list them for sale since that contest is "done"..
Some might be fun cams with a normal rocker in a street racer...

Title: Re: WTB: solid roller cam
Post by: 69 crewcab on June 11, 2023, 06:11:41 AM

I have a good used solid roller  cam and lifters  that I don't need .799 lift     274 and 282 at .050  110 centerline

Title: Re: WTB: solid roller cam
Post by: XR7 on June 12, 2023, 04:50:42 PM

Thanks guys, I have a new cam in the engine.