Performance Summary:
Cubic Inches: 462 Dyno brand: Stuska
Power Adder: N/A
Where dynoed: Dale Meers Racing Engines, Buffalo, KY
Peak Horsepower: 555 @ 5700
Peak Torque: 555 @ 4800
Engine Specifications:
Block brand, material, finished bore size, other notes: C-scratch 428, 4.160
Crankshaft brand, cast or forged, stroke, journal size: SCAT 4.25 stroke, 2.20 journal, cast
Connecting Rods brand, material, center to center distance, end sizes, bolts: Molnar BBC 6.70
Piston brand, material (caster, hypereutectic or forged), dish/dome volume, static CR: Mahle 1.325 compression height, 20 cc dish, 10.37:1
Main Bearings, Rod Bearings, Cam Bearings brand and size: Clevite rod and mains, Durabond cam bearings
Piston rings brand, size, other notes: Mahle, 1mm/1mm/2mm
Oil Pump, pickup, and drive: Melling M57HV, Canton pickup, POP drive
Oil pan, windage tray, oil filter adapter: Canton rear sump, factory oil filter adapter
Camshaft brand, type (hyd/solid, flat tappet or roller), lift and duration (adv and @.050"): Custom Bullock's Power Service high vacuum street hyd roller, 231/240 @ .050
Lifters brand, type: Morel standard travel
Timing chain and timing cover: Cloyes 9 position billet and factory timing cover
Cylinder heads brand, material, port and chamber information: TFS with blueptinted spring heights and pressures
Flow bench used, location: Not flowed
Intake valve brand, head size, stem size: TFS standard
Exhaust valve brand, head size, stem size: TFS standard
Valve springs brand, part number, specs: PAC 155/400
Retainers and locks brand, part number, specs: PAC with Manley seals
Rocker arm brand, type (adjustable or non-adj), material, ratio: Lykins non-adjustable 1.76
Rocker shafts and stands, brand, material: Precision Oil Pumps
Pushrods brand, type, length: Trend, 5/16, .080", various lengths
Valve covers, brand, type: Lemans Black Crinkle
Distributor brand, advance curve information: Holley Dual Sync 20 initial / 35 total, curve managed by Terminator X ECM
Harmonic balancer brand: Powerbond
Water pump brand, type (mechanical or electric): Edelbrock
Intake manifold brand, material, porting information: Borla 8 stack throttle body
Carburetor(s) brand, type: 8x 58 mm throttle bodies, 8x 47 lb injectors
Exhaust manifolds or headers brand, type: Dyno headers, 2" tubes