I have some 428 parts that I would like to sell. All parts are plus freight from 56016. If it would help, I am making a trip from southern Minnesota to Harrisburg, PA at Christmas with the possibility of delivering some of the heavy stuff.
C8OE 9425-C 428 CJ Intake Manifold, Date Code 8G29, Manifold is extremely clean and in excellent condition. Currently is painted black, I was going to use it in my 63 Galaxie but ended up going the 2 x 4 route. (And it weighs 81 pounds before packaging.) $375 SOLD
428 Crankshaft 1U crankshaft, Rod journals @ .010, Main journals @ .010. Will at least need to be polished. $275 SOLD
428 flywheel for C6 Transmission with spacer ring for flywheel bolts. (Fly wheel bolts are not included) Excellent condition, $75 SOLD
C9ZE-6582-B, 428 CJ Valve Cover. Note there is only one of them. Cast Aluminum with the ribs in it. I think it is for the road side based on a decal for idle speed and the oil cap opening (no grommet). $45 SOLD
428 CJ Metal Vacuum Line and both manifold fittings for PCV, Power Brakes, etc. $100 SOLD
Set of 8, 428 Std. pistons. These come out of a 428 CJ core that I turned into a 462. 7 of the pistons are TRW stamped L2245 STD on the piston face, the 8th piston appears to be an OEM piston with ”428” cast vertically adjacent to the piston pin boss. All the pistons appear to be in relatively good condition and appear to have very little time on them. $125
428 CJ C8AE A1 Crankshaft Damper and C8AE-6312-D 3 Groove Crankshaft Pulley assembly. These were pretty badly rusted when I got them so I did blast and paint them. The damper still has some pitting making the timing marks hard to see so it will probably need a timing tape installed. They will work fine and the rubber on the damper looks to be in very good condition. I would split these up if someone wanted. $100
Vintage Mickey Thompson FE Valve Cover Set, These have a black Crinkle finish with some of the paint coming off. Functionally they are fine but will take some work to make them look good again. $100