FE Power Forums
FE Power Forums => Vendor Classifieds => Topic started by: blykins on April 17, 2021, 09:03:51 AM
-
....with the Ford logo on them? Should be a C7AZ part number.
-
Brent,
I have a set on eBay. https://www.ebay.com/itm/363363871856
Make a deal directly with me... if you wish.
-
Here's the ones I'm looking for.....
https://www.ebay.com/itm/Power-By-Ford-Valve-Covers-Blue-FE-352-360-390-406-427-428/303949252169?hash=item46c4c98649:g:pgYAAOSwMxpgbK8l
Not into paying $250 for a set though. :D
-
Brent: just checked and I do have a set in very good condition but dirty. No dents from what I can see but a bit of surface rust.
Out of the 10 or so sets of the PBF covers this the only set with the Ford oval. What year and car (I'm assuming PU) were they on?
Figure $30 shipping so I'll send you the pair for $75. Do you want pictures?
Richard >>> FERoadster
-
Brent: just checked and I do have a set in very good condition but dirty. No dents from what I can see but a bit of surface rust.
Out of the 10 or so sets of the PBF covers this the only set with the Ford oval. What year and car (I'm assuming PU) were they on?
Figure $30 shipping so I'll send you the pair for $75. Do you want pictures?
Richard >>> FERoadster
Yes, please email pics. Are they clean inside or rusty? That's really the only deal breaker for me because I don't like glass/sandblasting the insides.
I'm always looking for different valve covers for my 352. Haven't really found the "look" that I want yet.
-
Here's the ones I'm looking for.....
https://www.ebay.com/itm/Power-By-Ford-Valve-Covers-Blue-FE-352-360-390-406-427-428/303949252169?hash=item46c4c98649:g:pgYAAOSwMxpgbK8l
Not into paying $250 for a set though. :D
I have a set, but I see Richard is in line ahead of me. Good luck with this.
-
I have a set of the earlier ones that don`t have the rectangle arouned them. The ones your looking for were the late style engine covers..
-
These ....... think they are Richard's
https://www.jalopyjournal.com/forum/attachments/fordlastversion-1-jpg.3577199/
Ricky.
-
badcatt.....
Your valve covers are WerbyFord valve covers ;-)
Ricky.
-
Brent, I found a chrome set on FB Marketplace if you are interested https://www.facebook.com/marketplace/item/906940253209067/
-
To others and thanks to Winr1 Yes most of the pic's may be my VC's since I've got over 100 sets, probably 35+ sets are stamped steel.
Brent asked specifically for the PBF with the Ford oval logo and those I think were only 1976 Ford PU, (I'll have to look at the factory sticker on the side though).
As far as he has asked for one off VC's I've got blocked lettered FORD. MERCURY. THUNDERBRD and even E400 Edsel's as well as FT and Ford Industrial VC's and a bunch of true Baldy round top's. I do have 5 sets of the Mercury Lightening bolt and some Branda Pentroof's as well and some FE marine VC's
He needs to be more specific about his want if these Ford PBF with the Ford logo don't work
If he is looking for one off finned aluminum after market that's an easier solution I can help with.
Richard >>> FERoadster
-
Richard, if you look at the Ebay link I showed up above, you will which ones I'm looking for.
I don't think they are from 1976 applications, they have a C7 part number in them???????
-
They are later 70s VC , and i have only seen them used on trucks out in the wild.
-
Later trucks and industrial
-
So what would the C7 part number be from?
-
Maybe early industrial? Not sure when Ford started doing the powerplants, but my guess is early
-
I *may* have a set on an engine, it’s supposedly a 330FT motor
I’ll try to load up the only pic I have at the moment...
-
Those are not the ones, but I appreciate it.
I think Richard has me taken care of.
-
Richard, if you look at the Ebay link I showed up above, you will which ones I'm looking for.
I don't think they are from 1976 applications, they have a C7 part number in them???????
They carried over the part number when they changed the design. I almost bought a set like the ones you want, but I had NOS Parts LTD. send me a picture and I nixed the order when I saw they were the late style. They were also black, rather than blue.
-
Bad news of sorts. Each VC has a dent in the top. I'll clean them up and see if I can bump them out. I've fabbed dolly's to do that but I'll have to degrease the insides first.
Hope to do that in a day or 2. I can ship from Denver next week.
They are definitely 1976 VC's. Emissions decal has a D6 part # and the assembly sticker on the front is A 6 and 76 stenciled.
Pictures attached, More info in the next couple of days.
Richard
-
I have 2 sets of them, one is dated November 74, and the other is June 75. Both sets are dinged up, but no rust. They must be a mid 70s truck thing. Rob
-
Not PBF but I have a pair of chrome Ford Motorsport valve covers I'd turn loose of. They haven't been available from Ford for a long time and they do have the Ford oval logo. They've had gaskets glued to them put I don't they have ever been run on a motor.