Thanks Jay. Yes, got the Accusump installed and all plumbed up. I managed to get a "nifty" pressure chart (which does not come with the actual product) that lets you know the capacity given various pre-charges and oil pressure while running.
The youtube video's suggest a precharge of somewhere between 10psi and 15psi. That would give me a capacity of 2.5 quarts, but very little "backpressure" to push that oil into the engine. Looking at the chart, at about 40 PSI, the capacity is 2 quarts at 70 PSI of oil pressure. I feel like at only a reduction of a half quart in capacity, I get more back pressure to push the 2 quarts in reserve into the engine when needed.
It may need some fine tuning as I go, but if I remember correctly, at like 2500 rpm the oil pressure stays up around 70. Anyone, please feel free to put in any thoughts on use or setup.
One thing I did want to mention is that with an accusump, you are not supposed to use an oil filter with a bypass! So I had to switch over to an oil filter without a bypass. Would feel better if I could have stayed with a bypass filter :0)