16
Private Classifieds / True High Nine differential
« on: December 28, 2018, 09:18:56 AM »
I am looking for a True High Nine differential thanks. Leny Mason
Dedicated to Building and Racing the Ford FE Engine
News:
SMF - Just Installed!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
17
FE Technical Forum / SOHC gasket set
« on: November 28, 2018, 11:18:04 PM »
Jay I would like a gasket set if it is not to late thanks. Leny Mason
18
FE Technical Forum / Wiring on a 1957 Ford
« on: September 11, 2018, 07:02:09 PM »
I am working on a 1957 Ford with a early Ford alternator and I need a wiring diagram from the light to the alternator thanks to anyone that can help. Leny Mason
19
FE Technical Forum / Copper Head Gaskets
« on: July 26, 2018, 06:57:21 AM »
We ordered head gaskets for my cammer , I assumed we were getting layered steel gaskets , what we got was Copper with rubber inlay around water passages, I have heard of using copper when not running water, it is super charged so maybe that is why the sent copper. Leny Mason
20
FE Technical Forum / Who is going to Bowling Green
« on: June 08, 2018, 07:56:01 AM »
Hi Who is going to The Hot Rod Reunion this year I have a friend bring there 1969 Mach 1 with a Cammer to the in field, it would be fun to meet up with any of you, My Comet is not done yet but close next year. Leny Mason
21
Non-FE Discussion Forum / Twin cam
« on: May 28, 2018, 09:50:41 PM »
Hi, I know there is some smart cam people here, if we advance the intake cam 4 degrees what should this do runs hotter to spool up faster, and what does advancing of retarding the exhaust cam just trying to understand how twin cams work thanks. Leny Mason
22
FE Technical Forum / super charged valve spring pressure
« on: February 25, 2018, 04:45:05 PM »
I need some expertise on valve spring Pressure naturally aspirated versus super charged, my Cammer has stock cams and I need to know what spring pressure would work the best it is super charged and Bret said Jay may know or some one else, thanks Leny Mason
23
FE Technical Forum / Taking apart a rusty 391
« on: February 15, 2018, 09:01:38 AM »
It has been sitting out side for a long time, the oil pan almost full of ice two days in my shop and still ice in the pan, to my surprise it turned over the two barrel carb had a rag that had rotted away, every thing looked nice in side some rust in two cylinders but not bad, we are trying to make a 428 out of it, unbelievable how nice it is inside. Leny Mason
24
FE Technical Forum / Crane cam SS330
« on: February 06, 2018, 07:29:23 PM »
I just dragged this cam out of my stash what does anyone know about this cam, Matt would like to use it in a 1967 Mustang 427 9-1 compression with a top loader wide ratio, I was thinking 389-1 or 350-1 Thanks Leny Mason
25
FE Technical Forum / Sohc by pass
« on: January 31, 2018, 08:50:40 AM »
Hi, we are starting on my engine and radiator for my Comet and I am not sure were it is, my engine is super charged so there is no upper radiator hose, so we will need to drill the intake manifold on each side and go to a stand alone thermostat housing, I have looked at my two four intake manifold and I see no previsions for a bypass hose Thanks. Leny Mason
26
Member Projects / Jay's intake
« on: October 28, 2017, 07:19:10 PM »
Hi, at Bakersfield's Hot Rod Reunion at the Hilborn Injection booth Andy Star had Jay's intake manifold there it looks Great way to go Jay keeping our FE's alive. Leny Mason
27
Member Projects / SOHC headers
« on: October 28, 2017, 10:52:45 AM »
Hi, I am starting to think about the headers for my Comet, I have cast iron heads and it is super charged the headers are coming out the front fenders, and I am wondering about what size the primary tubes should be, should they be as short as possible. Thanks Leny Mason
28
FE Technical Forum / Don't Jinx your self
« on: April 30, 2017, 09:02:32 AM »
Saturday we went on a garage tour around town to see peoples projects, so in the morning I was washing my Mustang and I was talking to my self saying what a great car it's been all these years always runs, well I get in to go to the tour it will not start, the starter solenoid gave up, so don't even talk to your self about how good your car is instant Jinx. Leny Mason
29
FE Technical Forum / Water pump adaptors
« on: February 04, 2017, 09:44:33 AM »
With the water pump adapters on a Cammer can I use the stub cam to run my distributor or is it in the way. thanks Leny Mason
30
FE Technical Forum / Engine mounts
« on: October 14, 2016, 07:45:37 AM »
Hi I am going to building Mounts for my blown FE just trying to get some ideas from people that have done this I am sure stock mounts will not work thanks Leny Mason