I'm rushing to get ready for Beaver Springs so no time to post pictures and more than quick information. I wanted to at least get this post done so send me respond with questions and I will try and respond. I'll also have some other odds and ends I will bring and if there's anything you might be looking for also let me know.
Complete 2x4 Tunnel wedge system:
· Dove tunnel wedge intake manifold. Not cut or ported. Like new
· 2 Holley 4160 600 c.f.m. carbs. With milled choke horns rebuilt by
· Linkage for a above
· Fiberglass bonnet for headlight air induction
· 6” tubes to connect to headlight opening.
Race ready C-6:
· Reverse manual valve body
· Aluminum pan
· Heavy duty steels , clutches and internals
Steel driveshaft for C6 install in 63/ 64 Galaxie:
· Spicer 1350 yoke to fit C6
Two FE crank shafts
· One U1B 428 needs some cleanup
· One stock 390
Miscellaneous:
· Plastic fuel cell
· Chrome valve covers
· More than a dozen radiator expansion tanks.
I've got quite a bit of FE / '64 Galaxie parts I have accumulated over the last 16 years so if you are looking for something specific let me know.
