Author Topic: Bullock's Power Service - pump gas 430cid ALL iron CJ - 480HP / 511TQ  (Read 304 times)

0 Members and 1 Guest are viewing this topic.

My427stang

  • Hero Member
  • *****
  • Posts: 3943
    • View Profile
Performance Summary:
      Cubic Inches:  430           Dyno brand: Stuska
      Power Adder:  N/A             Where dynoed:  Dale Meers Racing, Buffalo, KY
      Peak Horsepower:  480@6000
      Peak Torque:  511 @ 3300


Engine Specifications:
   Block brand, material, finished bore size, other notes:  1968 C scratch 428, 4.150 bore, CnC squared, aligned, torque plate honed
     
   Crankshaft brand, cast or forged, stroke, journal size: Factory cast 3.98
     
   Connecting Rods brand, material, center to center distance, end sizes, bolts:  Molnar H beam 6.49

   Piston brand, material (caster, hypereutectic or forged), dish/dome volume, static CR: Racetec, 11 cc dish, 10.05:1

   Main Bearings, Rod Bearings, Cam Bearings brand and size:  Clevite rod and main bearings, Durabond cam bearings

   Piston rings brand, size, other notes: Mahle 1mm/1mm/2mm standard tension

   Oil Pump, pickup, and drive:  Melling M57B, factory pickup, ARP drive

   Oil pan, windage tray, oil filter adapter:  Factory 68 CJ, factory tray unmodified, factory oil filter adapter

   Camshaft brand, type (hyd/solid, flat tappet or roller), lift and duration (adv and @.050"):  Custom Bullock's Power hydraulic roller, 229@.050 intake

   Lifters brand, type:  Morel standard travel

   Timing chain and timing cover: Early Comp (supplied by owner), factory cover

   Cylinder heads brand, material, port and chamber information:  C8OE-N CJ, 11/32 SI valve, minor bowl blend, 2.19 intake, 1.70 exhaust, Viton seals, spring locator cups

   Valve springs: Trick Flow 160/390
 
   Rocker arm brand, type (adjustable or non-adj), material, ratio:  Precision oil pumps, 1.76, adjustable

   Rocker shafts and stands, brand, material:  Precision Oil Pumps

   Pushrods brand, type, length:  Trick Flow 8.600 oiling

   Valve covers, brand, type:   68 CJ/GT chrome

   Distributor brand, advance curve information:  Factory 68 CJ with Pertronix, 12 initial, 38 total

   Harmonic balancer brand:  Stock, restored

   Water pump brand, type (mechanical or electric):   Stock rebuilt 68 Ford  - electric powered on dyno

   Intake manifold brand, material, porting information:  Untouched and unported CJ C80E-9425-A

   Carburetor(s) brand, type:  Peak power made with 750 dyno carb, but w/in 5 HP with correct CJ 735

   Exhaust manifolds or headers brand, type:  Dyno headers


« Last Edit: May 03, 2024, 05:31:42 PM by My427stang »
---------------------------------
Ross
Bullock's Power Service, LLC
- 70 Fastback Mustang, 489 cid FE, Victor, SEFI, Erson SFT cam, TKO-600 5 speed, 4.11 9 inch.
- 71 F100 shortbed 4x4, 461 cid FE, headers, Victor Pro-flo EFI, Comp Custom HFT cam, 3.50 9 inch

Stangman

  • Hero Member
  • *****
  • Posts: 1708
    • View Profile
Nice Ross is that going in a factory 428 car should scoot right along

My427stang

  • Hero Member
  • *****
  • Posts: 3943
    • View Profile
Yes sir, 68.5 fastback, 4 speed.
---------------------------------
Ross
Bullock's Power Service, LLC
- 70 Fastback Mustang, 489 cid FE, Victor, SEFI, Erson SFT cam, TKO-600 5 speed, 4.11 9 inch.
- 71 F100 shortbed 4x4, 461 cid FE, headers, Victor Pro-flo EFI, Comp Custom HFT cam, 3.50 9 inch

My427stang

  • Hero Member
  • *****
  • Posts: 3943
    • View Profile
On edit - here is a cleaned up video from the owner

Glad he could, it is a pretty engine

https://www.youtube.com/watch?v=mtgO0UFeXIA
« Last Edit: May 07, 2024, 07:13:26 AM by My427stang »
---------------------------------
Ross
Bullock's Power Service, LLC
- 70 Fastback Mustang, 489 cid FE, Victor, SEFI, Erson SFT cam, TKO-600 5 speed, 4.11 9 inch.
- 71 F100 shortbed 4x4, 461 cid FE, headers, Victor Pro-flo EFI, Comp Custom HFT cam, 3.50 9 inch