Author Topic: Brand new Foreign Top Loader available  (Read 1268 times)

0 Members and 1 Guest are viewing this topic.

e philpott

  • Hero Member
  • *****
  • Posts: 923
    • View Profile
Brand new Foreign Top Loader available
« on: July 09, 2020, 01:12:48 PM »
Interesting , Speedmaster has a brand new wide ratio top loader rated for 500 hp

https://www.jegs.com/i/Speedmaster/746/PCE646.1001/10002/-1

blykins

  • Hero Member
  • *****
  • Posts: 4828
    • View Profile
    • Lykins Motorsports
Re: Brand new Foreign Top Loader available
« Reply #1 on: July 09, 2020, 01:17:18 PM »
Rated for 16 lb-ft of torque.
Brent Lykins
Lykins Motorsports
Custom FE Street, Drag Race, Road Race, and Pulling Truck Engines
Custom Roller & Flat Tappet Camshafts
www.lykinsmotorsports.com
brent@lykinsmotorsports.com
www.customfordcams.com
502-759-1431
Instagram:  brentlykinsmotorsports
YouTube:  Lykins Motorsports

machoneman

  • Hero Member
  • *****
  • Posts: 3854
    • View Profile
Re: Brand new Foreign Top Loader available
« Reply #2 on: July 09, 2020, 01:35:21 PM »
Rated for 16 lb-ft of torque.

Hah!
Bob Maag

chilly460

  • Hero Member
  • *****
  • Posts: 689
    • View Profile
Re: Brand new Foreign Top Loader available
« Reply #3 on: July 09, 2020, 02:01:11 PM »
Can't imagine the market for a $2800 Toploader, when TKOs are cheaper, maybe stronger....and have overdrive. 

e philpott

  • Hero Member
  • *****
  • Posts: 923
    • View Profile
Re: Brand new Foreign Top Loader available
« Reply #4 on: July 09, 2020, 04:38:33 PM »
Can't imagine the market for a $2800 Toploader, when TKOs are cheaper, maybe stronger....and have overdrive.

I hear that BUT I just sold a new Richmond Super T-10 to a guy in a 1967 GTO , I just couldn't get him to buy into a 5 speed  despite the less than 700.00 dollars difference on a car with 14 inch wheels and a 4.33 , so go figure ??

gdaddy01

  • Hero Member
  • *****
  • Posts: 658
    • View Profile
Re: Brand new Foreign Top Loader available
« Reply #5 on: July 09, 2020, 05:40:53 PM »
Rated for 16 lb-ft of torque.
I think that may be overrated