« previous next »
Pages: [1] 2  All

Author Topic: Edelbrock 6005 Heads -SOLD  (Read 7431 times)

0 Members and 1 Guest are viewing this topic.

Nightmist66

  • Hero Member
  • *****
  • Posts: 1209
    • View Profile
Edelbrock 6005 Heads -SOLD
« on: April 09, 2017, 10:04:18 PM »
Up for sale is a set of used Edelbrock 6005s. These have a few hundred street miles on them. I have not run them, but purchased them from a friend who took them off a running motor. When I got the heads, they had a decent set of springs/retainers/keepers that matched my cam better that was in my car at the time, so I swapped out my old ones for the ones on these heads. The current springs on these heads I would NOT run. I put them on to make them complete. They checked at around 80-90 on the seat and about 215-225 open at .560" lift. The drainbacks I enlarged to 1/2" and radiused, but did not touch the intake side yet. The oil feed slot has been radiused at the edge leading into the head bolt hole on each. No porting on intake or exhaust. Minor pitting at a couple coolant ports on intake side. Should seal fine w/small dab of rtv.

Price is $975 free shipping within US






« Last Edit: May 09, 2017, 06:54:08 PM by Nightmist66 »
Logged
Jared



66 Fairlane GT 390 - .035" Over 390, Wide Ratio Top Loader, 9" w/spool, 4.86

jholmes217

  • Full Member
  • ***
  • Posts: 219
    • View Profile
Re: Edelbrock 6005 Heads
« Reply #1 on: April 13, 2017, 04:37:48 PM »
I sent you an e-mail on these by clicking on your profile.
Logged
Jeff
1969 Mach 1 Q code 428 Cobra Jet
4 speed, 3:50 traction lock
Olympia WA. area

Nightmist66

  • Hero Member
  • *****
  • Posts: 1209
    • View Profile
Re: Edelbrock 6005 Heads
« Reply #2 on: April 13, 2017, 10:21:03 PM »
I'm sorry, but I haven't seen an email yet. I will send you a PM.

Thanks, Jared
Logged
Jared



66 Fairlane GT 390 - .035" Over 390, Wide Ratio Top Loader, 9" w/spool, 4.86

Nightmist66

  • Hero Member
  • *****
  • Posts: 1209
    • View Profile
Re: Edelbrock 6005 Heads
« Reply #3 on: April 14, 2017, 05:45:59 PM »
Still for sale.
Logged
Jared



66 Fairlane GT 390 - .035" Over 390, Wide Ratio Top Loader, 9" w/spool, 4.86

Nightmist66

  • Hero Member
  • *****
  • Posts: 1209
    • View Profile
Re: Edelbrock 6005 Heads
« Reply #4 on: April 28, 2017, 05:35:36 PM »
$975 and free shipping within US
Logged
Jared



66 Fairlane GT 390 - .035" Over 390, Wide Ratio Top Loader, 9" w/spool, 4.86

FERoadster

  • Sr. Member
  • ****
  • Posts: 492
    • View Profile
Re: Edelbrock 6005 Heads
« Reply #5 on: April 28, 2017, 08:02:07 PM »
What are the valve sizes?
Logged

bluef100fe

  • Full Member
  • ***
  • Posts: 241
    • View Profile
Re: Edelbrock 6005 Heads
« Reply #6 on: April 28, 2017, 09:53:18 PM »
Are they the original 2.09/1.65 valves? Do you know the actual chamber size? Thanks
Logged


<a href="https://servimg.com/view/14375057/64" target="_blank" ><img  src="https://i58.servimg.com/u/f58/14/37/50/57/img_2013.jpg" border="0" alt="Image hosted by servimg.com" /></a>

Cody Ladowski
1976 F-100 stepside
390 C6 9 inch
1.56 sixty ft.
7.38 @ 91.5
11.79 @ 111.5

Nightmist66

  • Hero Member
  • *****
  • Posts: 1209
    • View Profile
Re: Edelbrock 6005 Heads
« Reply #7 on: April 28, 2017, 10:58:27 PM »
Quote from: FERoadster on April 28, 2017, 08:02:07 PM
What are the valve sizes?


Factory installed CJ size.
Logged
Jared



66 Fairlane GT 390 - .035" Over 390, Wide Ratio Top Loader, 9" w/spool, 4.86

Nightmist66

  • Hero Member
  • *****
  • Posts: 1209
    • View Profile
Re: Edelbrock 6005 Heads
« Reply #8 on: April 28, 2017, 11:01:27 PM »
Quote from: bluef100fe on April 28, 2017, 09:53:18 PM
Do you know the actual chamber size?


Supposed to be 72cc. I have not actually cc'd any chambers yet. Can if you would like. As far as I can tell, heads were never milled.
Logged
Jared



66 Fairlane GT 390 - .035" Over 390, Wide Ratio Top Loader, 9" w/spool, 4.86

bluef100fe

  • Full Member
  • ***
  • Posts: 241
    • View Profile
Re: Edelbrock 6005 Heads
« Reply #9 on: April 29, 2017, 05:37:40 AM »
Jared,

If you could pour one chamber that would be great, last set of 6005 edel's I had my hands one were closer to 80 cc's before I milled them a bunch.  Also where are you located in IL ? I'm going to be down there working next weekend, possibly save time/money on shipping if we can meet up? Also I can't use the used springs or retainers, waaay to light on psi for my junk,  and I'd prefer to buy just the valves and heads if possible? That way I could also verify the valve guide and seat condition... let me know, thanks
Logged


<a href="https://servimg.com/view/14375057/64" target="_blank" ><img  src="https://i58.servimg.com/u/f58/14/37/50/57/img_2013.jpg" border="0" alt="Image hosted by servimg.com" /></a>

Cody Ladowski
1976 F-100 stepside
390 C6 9 inch
1.56 sixty ft.
7.38 @ 91.5
11.79 @ 111.5

Nightmist66

  • Hero Member
  • *****
  • Posts: 1209
    • View Profile
Re: Edelbrock 6005 Heads
« Reply #10 on: April 29, 2017, 08:58:38 AM »
Cody, I will try to get a chamber measured for you. I am located in northern IL, about 2 1/2hrs west of Chicago. I can take the springs/retainers off if need be. I will PM you some more contact info. Thank you.
Logged
Jared



66 Fairlane GT 390 - .035" Over 390, Wide Ratio Top Loader, 9" w/spool, 4.86

Nightmist66

  • Hero Member
  • *****
  • Posts: 1209
    • View Profile
Re: Edelbrock 6005 Heads
« Reply #11 on: April 29, 2017, 06:17:11 PM »
I CC'd the end chambers on both heads. One head was 73.5cc's on both ends. The other came out 73.5cc and 74cc. I used an NGK BKR5E plug for checking.
Logged
Jared



66 Fairlane GT 390 - .035" Over 390, Wide Ratio Top Loader, 9" w/spool, 4.86

Nightmist66

  • Hero Member
  • *****
  • Posts: 1209
    • View Profile
Re: Edelbrock 6005 Heads
« Reply #12 on: May 01, 2017, 12:22:31 PM »
Sale pending...
Logged
Jared



66 Fairlane GT 390 - .035" Over 390, Wide Ratio Top Loader, 9" w/spool, 4.86

fastback 427

  • Sr. Member
  • ****
  • Posts: 442
    • View Profile
Re: Edelbrock 6005 Heads
« Reply #13 on: May 01, 2017, 01:19:45 PM »
If cody changes his mind , i would like to be next in line.
Logged
Jaime
67 fastback 427 center oiler 428 crank Dove aluminum
top end toploader
67 fairlane gta cross bolted 12:1 390 Dove aluminum top end c6 3600 stall
65 falcon straight axle project
67 mustang coupe project
76 f350 dually 390 mirror 105 4bbl 4spd
74 f100 xlt 390 c6 factory ac

Nightmist66

  • Hero Member
  • *****
  • Posts: 1209
    • View Profile
Re: Edelbrock 6005 Heads
« Reply #14 on: May 01, 2017, 03:11:46 PM »
Hi Jaime. Someone PM'd me after Cody inquired. You are third in line.

Thank you, Jared
Logged
Jared



66 Fairlane GT 390 - .035" Over 390, Wide Ratio Top Loader, 9" w/spool, 4.86
Pages: [1] 2  All
« previous next »