Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - oldmanpj

Pages: [1]
1
Private Classifieds / Re: 1966 428 pi
« on: July 01, 2019, 04:05:48 PM »
you ?

2
Private Classifieds / Re: 1966 428 pi
« on: July 01, 2019, 04:05:10 PM »
salisbury north carolina

3
Private Classifieds / Re: 1966 428 pi
« on: June 30, 2019, 08:10:52 PM »
My machinist said the bores looked real good at 30 and wouldn't need to be bored anymore.

4
Private Classifieds / Re: 1966 428 pi
« on: June 30, 2019, 08:08:43 PM »
Alan I will take some pictures and send them to you,do I send them through here or do you have a number or email you would like me to send them too?

5
Private Classifieds / Re: 1966 428 pi
« on: June 29, 2019, 10:03:56 AM »
rust as you know,what i can send some pics if you like?

6
Private Classifieds / 1966 428 pi
« on: June 28, 2019, 07:28:47 PM »
I acquired a 1966 police car that had the p code 428 pi solid lift motor with c6me block with the A scratch and  standard webbing with the 428 down in the water jacket it was bored 30 by the previous owner but cleaned up nice with a light hone.It has the 2287p pistons,seems that's all they done it because everything else is stock as it should be.Cam has an upside down A followed by BX,Crank is 1ub polished std-std.heads are c6ae-u with manifolds still attached,factory aluminum intake,adjustable rockers and autolite carburetor.I do not want to build it but i don't want to give it away either i had cam bearings installed and that's it other than cleaning and light hone.I'm looking for a rough idea of a value.Any help is appreciated.And M/T valve covers.I'll try to get some pics posted.

Pages: [1]