FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: country63sedan on December 05, 2023, 06:53:08 PM

Title: camshaft specs?
Post by: country63sedan on December 05, 2023, 06:53:08 PM

I didn't find anything good by searching, so before I set up a bunch of tools and such.... Does anyone have the specs for 330 and 361 ft cam specs. I have one of each and they look really good.  I'm trying to save a few bucks on a fuel mileage build.

BTW Ross, I parked my block next to a C scratch at the machine shop. I'm hoping it will gain some power thru osmosis.
Later, Travis

Title: Re: camshaft specs?
Post by: winr1 on December 05, 2023, 09:29:18 PM

Here is Blair Patrick on a 391 FT cam ..... may be the same ??


https://www.fordfe.com/391-cam-specs-t86913.html


I have an FT 391 cam I will measure


Ricky.

Title: Re: camshaft specs?
Post by: country63sedan on December 06, 2023, 07:20:30 PM

Thanks Ricky. I may have some time this weekend to do some measuring. All I can say by looking is they both have a huge base circle compared to the other stuff sitting on the pile. Later, Travis