SMF - Just Installed!
0 Members and 1 Guest are viewing this topic.
Ok ... I just checked the temp range of Dow Corning 732 clear. It is good up to 356 degrees F with occasional spikes up to 401 degrees. Then I researched typical intake manifold temperatures. That varies but generally speaking they should be around 250 degrees F at the upper end so the Dow Corning 732 should be good. I also found that the Dow Corning 732 Black has a slightly higher temperature rating ... maybe around 450 degrees F. I will see if I can find my receipt and return the "Right Stuff" back to the store.
I like motorcraft TA-31 im a Big believer after i sealed a pinhole in the radiator with water still in itColor werry close to Aluminium easy to take apart. Even get british motorcycles to stop leaking Sealed a crack in a board on the boat
Quote from: Heo on February 09, 2024, 12:51:50 PMI like motorcraft TA-31 im a Big believer after i sealed a pinhole in the radiator with water still in itColor werry close to Aluminium easy to take apart. Even get british motorcycles to stop leaking Sealed a crack in a board on the boatYeah, but the real test would it stop an oil leak on a Harley?