PCV Question

[Stangman]

I use a 3/16 brake line union fits in hose snug. Really like the BT one in the picture.

[Pontiac787]

I'd be playing the "gee what can I keep" game.

I may just use a piece of 1/2" hose to connect a PCV to the nipple already on the manifold plate to start off with.  I'd like to buy the plate like you have but the guy hasn't gotten back to me if he would sell it separate from the basket.  He sells the baskets separate so why not?

Did you tap yours to a pipe thread?  I don't think I've ever tapped a something for pipe fitting. 

[Drew Pojedinec]

If it's thick enough, go for it.  Mine just uses a nipple to hose to pcv which is screwed into a 45 degree fitting and into the intake.

I think I either used this valve, or one that looked like it.

https://www.summitracing.com/parts/smp-v100/overview/

[alf1960]

here is what is on my tripower from HP Trends. He sells these separately. http://hptrends.com/PCVFitting.htm

[Pontiac787]

Thanks Alf. That is the setup I’m going to use if my prototype works ok.  Instead of the brass T I’m going to use an Earl’s 3/8 to 1/4” Y splitter.  Is there any type of restrictor in your setup?

[alf1960]

I `m not sure about that sorry.

[6667fan]

Is the valley tray installed? JB.