« previous next »
Pages: [1]

Author Topic: Is this block worth grabbing??  (Read 2890 times)

0 Members and 1 Guest are viewing this topic.

galaxastang

  • Jr. Member
  • **
  • Posts: 55
    • View Profile
Is this block worth grabbing??
« on: September 11, 2014, 06:31:15 PM »
Hey guys,
           It looks like this block has had some machine work done. It looks like their saying it was casted that way. Never heard of a cross bolted 428 SCJ, not much info on site. Is this something Holman Moody did after market, looks like typical ribbed service block. Your thoughts.  Thanks


ebay item # 171450020107
Logged

GJCAT427

  • Hero Member
  • *****
  • Posts: 662
    • View Profile
Re: Is this block worth grabbing??
« Reply #1 on: September 12, 2014, 05:15:50 AM »
I would ask if there is a HM stamping on the block on one of the machining pads. Most of the Holman Moody stuff I`ve seen has there marking s on them, but not always. Otherwise it looks good
Logged

MT63AFX

  • Jr. Member
  • **
  • Posts: 46
    • View Profile
Re: Is this block worth grabbing??
« Reply #2 on: September 12, 2014, 08:10:23 AM »
Quote from: galaxastang on September 11, 2014, 06:31:15 PM
Hey guys,
           It looks like this block has had some machine work done. It looks like their saying it was casted that way. Never heard of a cross bolted 428 SCJ, not much info on site. Is this something Holman Moody did after market, looks like typical ribbed service block. Your thoughts.  Thanks


ebay item # 171450020107

It was not cast as a crossbolt block. It is evident by the wide spacers used for the OE 427 main caps. It was machined to accept the spacers...
Logged
Pages: [1]
« previous next »