FE Power Forums
FE Power Forums => Vendor Classifieds => Topic started by: blykins on January 17, 2021, 06:47:33 AM
-
This is the carb that I built for my 352 project but I didn't end up using it.
All the individual pieces were recolored by Drew Pojedinec and I assembled it here with a new rebuild kit. I left the choke plate and cable off, but I still have all the original pieces and you can add that back on if you wish.
Lots of internal work completed, PVCRs and IFRs were drilled and tapped for screw-in pieces. All HSAB and IAB were also drilled and tapped for regular screw-in bleeds. All original orifices were pin gauged and the screw-in replacements were sized back to factory spec.
$650 plus shipping.