Still catching up....
Performance Summary:
Cubic Inches: 429 Dyno brand: Stuska
Power Adder: N/A Where dynoed: Dale Meers Racing Engines
Peak Horsepower: 471 @ 5600
Peak Torque: 485
Horsepower and Torque Curves:
Engine Specifications:
Block brand, material, finished bore size, other notes: Robert Pond Motorsports, cast iron, 4.250"
Crankshaft brand, cast or forged, stroke, journal size: Factory Ford 390
Connecting Rods brand, material, center to center distance, end sizes, bolts: Scat 6.490"
Piston brand, material (caster, hypereutectic or forged), dish/dome volume, static CR: Custom Racetec forged, flat top
Main Bearings, Rod Bearings, Cam Bearings brand and size: Calico coated Federal Mogul
Piston rings brand, size, other notes: Total Seal 1.5/1.5/3mm
Oil Pump, pickup, and drive: M57HV, Canton front sump pickup
Oil pan, windage tray, oil filter adapter: Canton front sump
Camshaft brand, type (hyd/solid, flat tappet or roller), lift and duration (adv and @.050"): Custom Lykins Motorsports hydraulic roller, 233/243 @ .050"
Lifters brand, type: Morel
Timing chain and timing cover: Cloyes billet timing set, factory timing cover
Cylinder heads brand, material, port and chamber information: Factory C5AE-F, non-ported
Cylinder head flow in cfm at inches of lift (28" H2O pressure drop):
Intake Exhaust
.100 .100
.200 .200
.300 .300
.400 .400
.500 .500
.600 .600
.700 .700
.800 .800
Flow bench used, location:
Intake valve brand, head size, stem size: SI stainless, 11/32", 2.190"
Exhaust valve brand, head size, stem size: SI stainless, 11/32", 1.750"
Valve springs brand, part number, specs: PAC dual springs
Retainers and locks brand, part number, specs:
Rocker arm brand, type (adjustable or non-adj), material, ratio: Lykins Motorsports, roller tip non-adjustable
Rocker shafts and stands, brand, material: POP HD
Pushrods brand, type, length: Custom Trend
Valve covers, brand, type: Cobra Lemans
Distributor brand, advance curve information: Factory FE with steel gear & Pertronix
Harmonic balancer brand: Powerbond
Water pump brand, type (mechanical or electric): Factory cast iron replacement
Intake manifold brand, material, porting information: Ford Sidewinder
Carburetor(s) brand, type: Holley 800
Exhaust manifolds or headers brand, type: Dyno headers