« previous next »
Pages: [1]

Author Topic: RC Bellhousing and Bottom Cover  (Read 2713 times)

0 Members and 1 Guest are viewing this topic.

babybolt

  • Hero Member
  • *****
  • Posts: 516
    • View Profile
RC Bellhousing and Bottom Cover
« on: September 18, 2016, 05:26:32 PM »
Reproduction RC bellhousing with lettered bottom cover.  Machined for the larger 65 and later bearing retainer (will not work with the Warner T10 transmission).  The polished area at the bottom is where is it was Brinell tested for hardness.  Some shelf wear.

$750 plus shipping.

Pictures are here:


http://s134.photobucket.com/user/stuffnpics/library/rcbellhousing5
« Last Edit: September 21, 2016, 06:59:49 PM by babybolt »
Logged

GJCAT427

  • Hero Member
  • *****
  • Posts: 662
    • View Profile
Re: RC Bellhousing and Bottom Cover
« Reply #1 on: September 21, 2016, 05:40:21 AM »
Babybolt, how was Canfield? Didn`t get there this yr. Did you ever have this housing fitted to a block? And how much fussing would it take to fit up? Garry GJCAT
Logged

babybolt

  • Hero Member
  • *****
  • Posts: 516
    • View Profile
Re: RC Bellhousing and Bottom Cover
« Reply #2 on: September 21, 2016, 07:19:24 PM »
Hi Garry,

I was at Canfield for awhile, saw maybe a third of the show.  There was a FE Streetmaster intake there for $125.  Seems to me that there were more empty spaces than normal.   Made the mistake of stopping by a fast food place on the way and then had a 5 alarm emergency  :o

This bellhousing has been tested on a block.

Doug
Logged
Pages: [1]
« previous next »