FE Power Forums
FE Power Forums => Vendor Classifieds => Topic started by: babybolt on September 18, 2016, 05:26:32 PM
-
Reproduction RC bellhousing with lettered bottom cover. Machined for the larger 65 and later bearing retainer (will not work with the Warner T10 transmission). The polished area at the bottom is where is it was Brinell tested for hardness. Some shelf wear.
$750 plus shipping.
Pictures are here:
http://s134.photobucket.com/user/stuffnpics/library/rcbellhousing5
-
Babybolt, how was Canfield? Didn`t get there this yr. Did you ever have this housing fitted to a block? And how much fussing would it take to fit up? Garry GJCAT
-
Hi Garry,
I was at Canfield for awhile, saw maybe a third of the show. There was a FE Streetmaster intake there for $125. Seems to me that there were more empty spaces than normal. Made the mistake of stopping by a fast food place on the way and then had a 5 alarm emergency :o
This bellhousing has been tested on a block.
Doug