31
FE Technical Forum / Re: Guess the horsepower - first of two "sneaky 461" - extra cheating included
« on: November 05, 2019, 08:47:20 AM »
543 HP
Dedicated to Building and Racing the Ford FE Engine
News:
SMF - Just Installed!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
32
FE Technical Forum / Re: Guess the horsepower - second of two - "461 truck motor"
« on: November 01, 2019, 10:25:41 AM »
441 HP
33
FE Technical Forum / Re: The next guess the horsepower game.....
« on: October 22, 2019, 07:19:05 AM »
539
34
FE Technical Forum / Re: It's been a while.....time for another guess the horsepower game....
« on: July 29, 2019, 08:04:53 AM »
549 @ 6100
35
FE Technical Forum / Re: Carburetor Choices HELP ??
« on: July 24, 2019, 07:10:11 AM »
Thanks Everybody for the help really appreciate it . Great Forum
36
FE Technical Forum / Re: Carburetor Choices HELP ??
« on: July 23, 2019, 07:49:17 PM »
427LX I just put a 370 posi gear in the truck, right now it has 3 on the tree with overdrive. But later on im going to put a TKO 600 transmission in it. Thanks for the reply
37
FE Technical Forum / Re: Carburetor Choices HELP ??
« on: July 23, 2019, 10:21:51 AM »
Thanks everybody , hey Drew Pojedinec the 750 i got somebody had changed the jets in it before i got it and im not sure what they should be ?? i put a 69 in the front and a 72 in the rear and a 4.5 power valve but i think the power valve should have been a 6.5 ? what would be a good jet size for this ?
Many Thanks
Many Thanks
38
FE Technical Forum / Carburetor Choices HELP ??
« on: July 23, 2019, 08:37:05 AM »
Hey everybody wanted to ask whats the best carb for this engine ?? FE 416 bore 4.080 stroke 3.98 Barry's Felony Heads Comp Cam Duration @ 50 243 251 Lift 638 643 Mahle pistons should be close to 10-1 Brent's new rockers and smith brothers push rods Howards roller lifters RPM intake Melling HV pump Canton windage tray and Milodon Oil Pan stock. Now i rebuild a Holley 750 but not sure if its big enough its several years old and dont want to leave any HP on the table also i was reading on here a lot guys are running 850 or 950 or bigger, i have no experience with this so all help is appreciated . This engine is going in 1966 F100 that will be drove less that 3000 miles a year just a weekend deal.
Many Thanks
Twinibeam66
Many Thanks
Twinibeam66
39
FE Technical Forum / Re: Rpm Intake & super sucker
« on: March 29, 2019, 08:54:19 AM »
ok Thanks Jim comet i really liked the HP your engine made , hope mine will do close to that.
40
FE Technical Forum / Re: Rpm Intake & super sucker
« on: March 29, 2019, 06:39:22 AM »
ok thank you
41
FE Technical Forum / Rpm Intake & super sucker
« on: March 28, 2019, 08:20:22 PM »
Hey everybody on my 416 Build I am getting close to putting the intake on, its a Eldbrock RPM what modifications is everybody making to the plenum if any are necessary ?? Also thinking of using a 1 inch 4 hole super sucker spacer ?
Thanks everybody
Thanks everybody
43
FE Technical Forum / Re: Quench Help please
« on: March 22, 2019, 09:45:14 PM »
Falcon67 that's what im afraid of, that would be just my luck Thanks for the reply
44
FE Technical Forum / Re: Need a name for the FE Power Cylinder Heads...
« on: March 22, 2019, 07:51:12 AM »
Jay my choice for your head name is----- JAYBIRDS or JAYBIRD1 or JAYBIRD
45
FE Technical Forum / Re: Quench Help please
« on: March 22, 2019, 07:49:33 AM »
My427stang Thanks for all your help and reply's really appreciate that.
TwinIbeam66
TwinIbeam66