Brent, I need a third set, keep them coming!
FYI - If any of you are on the fence, what an easy decision during a build. I was going to do a write up, but what kind of write up can you do when you just bolt them on, check pushrod length, buy cheaper pushrods because they are common size, gain pushrod clearance, etc? They are just easy and nice.
Also FYI - They fit at .630 lift under PBF valve covers if you squeeze the baffles a little with a pair of channel locks...easy job, at more normal lift, I'd expect no issues at all, and tons of room with pentroofs, both cast alum and steel
I guess that was a write-up