FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: john a on June 09, 2015, 02:42:50 PM

Title: cold valve lash
Post by: john a on June 09, 2015, 02:42:50 PM

comp recommends. 022 hot. This is a 282s, its a new cam so I cant do them hot. Iron block, alum heads, what should I set them cold?

John
 

Title: Re: cold valve lash
Post by: jayb on June 09, 2015, 03:29:35 PM

I'd go with 0.014".  The heads will grow when hot, and increase lash by .007-.008 or so.

Title: Re: cold valve lash
Post by: john a on June 09, 2015, 11:32:44 PM

Thanks Jay