1
Private Classifieds / Re: Weiand 1994 351C Tunnel Ram - Single 4 Bbl
« on: March 01, 2024, 09:44:16 PM »
More pics...
Dedicated to Building and Racing the Ford FE Engine
News:
SMF - Just Installed!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Private Classifieds / Weiand 1994 351C Tunnel Ram - Single 4 Bbl
« on: March 01, 2024, 09:41:12 PM »
Good condition, no damage. $400 + shipping from zip 78248.
Thanks,
Scott
Thanks,
Scott
3
FE Technical Forum / Re: 351C Tunnel Ram ID?
« on: March 01, 2024, 09:38:38 PM »That's a Weiand 1994 with a single 4 top. I've never seen one of those tops, I think they only come with the dual four barrel tops now. Lots of FE guys will use something like that with my FE to 351C intake adapters.
Thanks, Jay. That's why I posted in the main forum; I was familiar with your adapters.
I'll list it in the classifieds.
Scott
5
FE Technical Forum / 351C Tunnel Ram ID?
« on: March 01, 2024, 09:22:29 PM »
Anyone know anything about 351C tunnel rams? Traded a guy some '68 GTO parts for it a few minutes ago. He claimed it was for a 351C, but the numbers aren't legible. Can anyone help with ID? Also, if you guess on value, I'm all ears. My people are FE and Windsor people, so I'm going to send it down the road.
Thanks,
Scott
Thanks,
Scott
6
Private Classifieds / Re: FE Rocker Stands - Aftermarket - Unused?
« on: September 28, 2023, 10:15:08 PM »
SOLD
7
Private Classifieds / Re: FE Rocker Stands - Aftermarket - Unused?
« on: September 28, 2023, 10:25:24 AM »
New price - $50 + shipping.
8
Private Classifieds / FE Rocker Stands - Aftermarket - Unused?
« on: September 27, 2023, 08:25:53 PM »
Going through stuff in the garage left over from a 428 build from about 12 years ago, and I've got 4 billet aluminum stands and 4 steel stands and a fair amount of hardware. I don't recall who manufactured these. The billet stands are definitely new; pretty sure the steel ones are new, too.
I'm not sure what it's worth, but how about $75 + shipping for everything pictured? I'm in San Antonio. I take PayPal, Zelle, Venmo.
I'm not sure what it's worth, but how about $75 + shipping for everything pictured? I'm in San Antonio. I take PayPal, Zelle, Venmo.
9
FE Technical Forum / Re: Rocker Stand Identification - OEM and Aftermarket
« on: September 27, 2023, 08:18:27 PM »
Listing it all in the classifieds if anyone is interested. Thanks
10
FE Technical Forum / Re: Rocker Stand Identification - OEM and Aftermarket
« on: September 25, 2023, 06:54:19 PM »The cast rocker stands are the strongest available. They provide very good support for the rocker shafts. Far better than the aluminum ones - factory or aftermarket. The split iron ones clamp the rocker shafts. The aluminum ones end up oval and allow the shaft to move up and down with time.
The factory 427's were the cast iron stands - should be worth something to someone.
Thanks for the info!
Scott
11
FE Technical Forum / Rocker Stand Identification - OEM and Aftermarket
« on: September 24, 2023, 09:45:43 PM »
Fellas - I'm still cleaning out the garage. Ran across a small box with my rocker arm stand bits and could use a bit of help with identification since it's been 10 or 12 years since I touched any of this.
The cast iron rocker stands aren't anything special, right? Just regular OEM?
The billet aluminum ones should be from POP or maybe DSC Motorsport? Look familiar to anyone?
Any ideas on what all this is worth? I'm not planning on building an FE again anytime soon, so I'm not going to hang on to it.
Scott
The cast iron rocker stands aren't anything special, right? Just regular OEM?
The billet aluminum ones should be from POP or maybe DSC Motorsport? Look familiar to anyone?
Any ideas on what all this is worth? I'm not planning on building an FE again anytime soon, so I'm not going to hang on to it.
Scott
12
Private Classifieds / 1966 Fairlane Convertible, 428, 4 speed, Restored, San Antonio, Texas
« on: September 06, 2023, 09:28:18 AM »
Just retired from the Army after 26 years and need the funds to start a business so my restored '66 Fairlane is up for sale. New interior, fresh drivetrain, fresh paint, pretty much everything new/refurbished, etc.
I could write a book and post dozens of pics, but best bet is to check out the auction - currently on eBay with no reserve - https://www.ebay.com/itm/325800327787
Thanks,
Scott
I could write a book and post dozens of pics, but best bet is to check out the auction - currently on eBay with no reserve - https://www.ebay.com/itm/325800327787
Thanks,
Scott
13
Member Projects / Re: 87 F350 Crew Cab Diesel Dually Rescue, Rebuild, and 4x4 Conversion!
« on: June 12, 2023, 08:37:24 PM »
Truck is now for sale on eBay with No Reserve. Here's the link in case anyone is interested - https://www.ebay.com/itm/325687885812
Here's why I'm selling - https://www.youtube.com/watch?v=gWl0XclMQXo&t=2s
Thanks,
Scott
Here's why I'm selling - https://www.youtube.com/watch?v=gWl0XclMQXo&t=2s
Thanks,
Scott
14
Member Projects / Re: 87 F350 Crew Cab Diesel Dually Rescue, Rebuild, and 4x4 Conversion!
« on: May 03, 2023, 07:43:13 PM »Got the short block done on the 7.3 IDI turbo diesel engine build - https://www.youtube.com/watch?v=O-96getWjac&t=103s
Hurry and get it on road! Will you use it to move back to TX?
Hey Randy - It's getting close! Engine and trans are in and I start the transfer case (BW 1356) rebuild this weekend.
Will probably sell the truck in June or July, but should be running and driving by then. Too many projects stacked up back home in Texas.
Scott
15
Member Projects / Re: 87 F350 Crew Cab Diesel Dually Rescue, Rebuild, and 4x4 Conversion!
« on: April 27, 2023, 09:33:11 AM »
Got the short block done on the 7.3 IDI turbo diesel engine build - https://www.youtube.com/watch?v=O-96getWjac&t=103s