Performance Summary:
Cubic Inches: 352 Dyno brand: Stuska
Power Adder: I wish Where dynoed: Dale Meers Racing Engines, Buffalo, KY
Peak Horsepower: See Below
Peak Torque: See Below
Horsepower and Torque Curves:
Engine Specifications:
Block brand, material, finished bore size, other notes: FoMoCo C6ME-A, virgin block
Crankshaft brand, cast or forged, stroke, journal size: FoMoCo cast 352 crankshaft, standard/standard
Connecting Rods brand, material, center to center distance, end sizes, bolts: FoMoCo 352 skinny rods, standard
Piston brand, material (caster, hypereutectic or forged), dish/dome volume, static CR: FoMoCo, unknown specifics, virgin slugs
Main Bearings, Rod Bearings, Cam Bearings brand and size: FoMoCo
Piston rings brand, size, other notes: FoMoCo
Oil Pump, pickup, and drive: FoMoCo
Oil pan, windage tray, oil filter adapter: FoMoCo passenger car pan, no tray, truck filter adapter
Camshaft brand, type (hyd/solid, flat tappet or roller), lift and duration (adv and @.050"): FoMoCo, HFT, roughly 186°, 114 LSA, .400"
Lifters brand, type: FoMoCo HFT
Timing chain and timing cover: FoMoCo timing cover, unknown replacement single row chain
Cylinder heads brand, material, port and chamber information: C6AE-R, original
Cylinder head flow in cfm at inches of lift (28" H2O pressure drop):
Intake Exhaust
.100 .100
.200 .200
.300 .300
.400 .400
.500 .500
.600 .600
.700 .700
.800 .800
Flow bench used, location: Not flowed
Intake valve brand, head size, stem size: Factory FoMoCo
Exhaust valve brand, head size, stem size: Factory FoMoCo
Valve springs brand, part number, specs: Factory FoMoCo
Retainers and locks brand, part number, specs: Factory FoMoCo
Rocker arm brand, type (adjustable or non-adj), material, ratio: Factory FoMoCo, non-adjustable
Rocker shafts and stands, brand, material: Factory FoMoCo
Pushrods brand, type, length: Factory FoMoCo
Valve covers, brand, type: Factory FoMoCo
Distributor brand, advance curve information: MSD billet distributor, quick springs, all in by 2200
Harmonic balancer brand: Factory FoMoCo
Water pump brand, type (mechanical or electric): Factory FoMoCo
Intake manifold brand, material, porting information: See below
Carburetor(s) brand, type: See below
Exhaust manifolds or headers brand, type: Dyno headers, 2" tubes
ITERATION # 1:
Autolite 2100, 356 cfm, 42° total timing: 208 hp @ 4250, 300 lb-ft @ 3250
ITERATION # 2:
Holley 500 2-bbl, 42° total timing, 234 hp @ 4250, 300 lb-ft @ 3750
ITERATION #3:
Blue Thunder 1x4 LR intake, plenum divider cut WAY down, Holley 650 DP, 42° total timing: 264 hp @ 4250, 344 lb-ft @ 3750