FE Power Forums
FE Power Forums => FE Technical Forum => Topic started by: 69 crewcab on December 23, 2020, 08:41:46 AM
-
I have an early Genesis block and am looking for torque specs for the bottom end. Specifically the cross bolts on the mains. It has ARP bolts. I have read that on the stock blocks the cross bolts torque to 40 lbs but I believe they have smaller bolts ?
-
I've never used a Genesis block, so maybe somebody else will chime in, but generally speaking, an ARP main stud torques at 110 lb-ft and a 7/16" ARP side bolt will torque at 65.