FE Power Forums

FE Power Forums => Private Classifieds => Topic started by: Stangman on June 05, 2019, 08:58:37 AM

Title: Making some room
Post by: Stangman on June 05, 2019, 08:58:37 AM

I have a set of 6114 headers that have no cracks, one dimple were pitman arm would hit on tight turns. I had them ceramic coated and didn’t like how they came out and sure enough 4 Year’s later started peeling off. Bought a new ceramic coated set when I installed new motor.
                                200.00

I also have a top loader that was behind a 351 Cleveland 4bl motor, my dad bought it from a friend 20 years ago. Will get tag number. From memory it’s a small spline. TAG# RUG-AV. CASE #7006-DW2
                                 400.00
Also have a dual point 427 Accel distributor Part number 30200 number under it is D56370. Has points in it and they look good by my 52 year old eyes. The points have been in there since the late 80s I don’t know if that’s a good set or not. Spinning it it sounds snappy. I don’t know what it’s worth maybe a dizzy guy can chime in.


Unfortunately I’m computer illiterate posting pictures but if interested will send pictures via text.

                 

Title: Re: Making some room
Post by: Stangman on June 11, 2019, 05:31:46 PM

Tranny sold pending payment

Title: Re: Making some room
Post by: Stangman on June 13, 2019, 06:10:54 PM

Headers adjusted to 150.

Title: Re: Making some room
Post by: Stangman on June 19, 2019, 03:27:23 PM

Tranny sold

Title: Re: Making some room
Post by: XR7 on June 20, 2019, 11:42:08 AM

I might be interested in the Accel distributor, I'll PM you my number to text a picture. Thanks.