More information on this build can be found at the following link:
http://fepower.net/simplemachinesforum/index.php?topic=6368.0Performance Summary:
Cubic Inches: 482 Dyno brand: Superflow 901
Power Adder: None Where dynoed: FE Power
Peak Horsepower: 715
Peak Torque: 587
Horsepower and Torque Curves:
Engine Specifications:
Block brand, material, finished bore size, other notes: BBM cast iron block, 4.25" bore, block not drilled for oil drainbacks for the SOHC, external drainbacks used
Crankshaft brand, cast or forged, stroke, journal size: Scat forged 4.25" stroke, BBC rod journals
Connecting Rods brand, material, center to center distance, end sizes, bolts: Scat H-Beam BBC rods, 6.700" center to center
Piston brand, material (caster, hypereutectic or forged), dish/dome volume, static CR: Diamond forged pistons, 35.5cc dome, zero deck, 11.5:1 static compression ratio
Main Bearings, Rod Bearings, Cam Bearings brand and size: Federal Mogul 125M 3/4 groove main bearings, Clevite CB-743HNK coated rod bearings, Durabond sideoiler cam bearings, standard SOHC cam bearings for the heads
Piston rings brand, size, other notes: Hastings ring package 09024250, 1/16 - 1/16 - 3/16 rings, Moly top ring, cast second, chrome oil rings. Support rail for oil rings required.
Oil Pump, pickup, and drive: Precision Oil Pumps high volume oil pump with 5/16" hex, standard spring, heavy duty pump drive, Canton pickup for cast aluminum Cobra oil pan
Oil pan, windage tray, oil filter adapter: Cast aluminum Cobra oil pan, Moroso louvered windage tray, Precision Oil Pumps oil filter adapter with two pipe thread outlets, one used for feeding oil externally to the cylinder heads, the other for the oil pressure gauge
Camshaft brand, type (hyd/solid, flat tappet or roller), lift and duration (adv and @.050") Comp 8594 lobes on both intake and exhaust, 300 adv duration, 277
@0.050" lobe lift, 0.723" gross valve lift, 112 LSA, right cam degreed at 107, left cam degreed at 109
Lifters brand, type: Who needs lifters??
Timing chain and timing cover: Complete Robert Pond Motorsports timing set with the pre-stressed secondary chain and 0.250" roller pins. Comp Cams stub cam. Robert Pond Motorsports timing cover.
Cylinder heads brand, material, port and chamber information: Robert Pond Motorsports aluminum heads, 120cc combustion chamber
Cylinder head flow in cfm at inches of lift (28" H2O pressure drop):
Intake Exhaust
.100 71 .100 56
.200 158 .200 128
.300 239 .300 195
.400 304 .400 243
.500 353 .500 262
.600 375 .600 268
.700 375 .700 271
.800 .800
Flow bench used, location: Superflow 600 Bench at R&R Performance
Intake valve brand, head size, stem size: Ferrea 2.300", 11/32 hollow stem
Exhaust valve brand, head size, stem size: Ferrea 1.900", 11/32 hollow stem
Valve springs brand, part number, specs: Comp 943 springs, 220 pounds on the seat, 585 at .700" lift
Retainers and locks brand, part number, specs: Comp tool steel retainers, Manley machined steel locks
Rocker arm brand, type (adjustable or non-adj), material, ratio: FE Power non-adjustable SOHC rockers, roller tip, 4130 steel, 1.3:1 ratio
Rocker shafts and stands, brand, material: Rocker shafts from T&D Machine, spring clips from T&D Machine
Pushrods brand, type, length: Just say no to pushrods!
Valve covers, brand, type: Unknown brand, acquired from customer, powder coated
Distributor brand, advance curve information: No distributor, stock distributor modified for oil pump drive only, Crane steel distributor gear
Harmonic balancer brand: Romac fully degreed balancer
Water pump brand, type (mechanical or electric): CVR Pro-Flow extreme electric water pump with FE Power water pump adapters
Intake manifold brand, material, porting information: Hilborn mechanical FI manifold, modified for electronic fuel injection
Carburetor(s) brand, type: NA
Exhaust manifolds or headers brand, type: Custom SOHC dyno headers