FE Power Forums
FE Power Forums => Non-FE Discussion Forum => Topic started by: Joe-JDC on May 09, 2022, 09:21:55 AM
-
The TFS intakes that were used on Jay's dyno testing were for 351W 9.5" decks. I don't have any 9.2" blocks or intakes for them. Joe-JDC
-
Joe, are you sure about that? A manifold for a 9.5 deck will not fit my intake adapter, which is what I tested those on...
-
No, I am not sure, now that you question it. I will have to go check the part numbers. I probably goofed up and got rid of my adapter that was destined for the TFS intakes. I still have one adapter left. I will try to check those part numbers later today. Joe-JDC
-
This is what happens when you don't work on something for several years. It gets boxed up, put on shelves, and forgotten about until someone asks a question. I do have both intakes. A 9.2", and 9.5". I was planning on using the EFI W intake on my all aluminum 427 SBF. I just have too many projects going to remember everything clearly. Joe-JDC
-
I still get a "Forbidden" when I try to answer Rob about the intake and plenum. I am logged in, can post pictures, but can't private message for some reason. You can email me at: joe dot d dot craine@gmail.com I will part with the Cleveland lower and box top if interested. Joe-JDC