I am running my Comet at Grove Creek this weekend and to play off of the guess my hp threads, how about guess my ET? I will post my results on Sunday.
Performance Summary:
1st time out with new motor and car set up: June 2019
1/8 mile ET: 7.559 1/8 mile MPH: 95.26
60 foot time: 1.54
Track: Grove Creek raceway, MN
40 passes later/car is getting sorted out: October 2019
1/8 mile ET: 6.811 1/8 mile MPH: 99.79
60 foot time: 1.463
Track: Rock Falls raceway, WI
1/4 mile ET: 10.74 1/4 mile MPH: 124.50
60 foot time: 1.463
Track: Rock Falls raceway, WI
Vehicle Use: Bracket racing strip only
(For example, occasional strip use, street/strip with regular strip use, or strip only)
Vehicle Specifications:
Model Year: 1966
Model: Comet
Style:2 door hard top, subframe connectors and 8 point roll bar.
Engine Details : See my guess my horsepower post for specifics: 416ci dyno'd at Jay Browns 600hp@6800rpm
Transmission: C6 fully rollerized. Low ratio kit. 1st/2.72, 2nd/1.54 and 3rd 1:00 NO trans brake. Will leave off of 2 step.
Torque converter details (if automatic): ATI 5000? stall, Spec'd by Blair Patrick
Clutch details (if manual):
Driveshaft: 3" stock big block shaft w/upgraded yoke.
U-joints: 1330/1350 performance joints
Rear end type: 9 inch Yukon aluminum center.
Differential type: 35 spline PEM spool
Gear Ratio: 4.11
Axles:35 spline Quick performance
Front tires:Moroso 6.5-15?
Front wheels: Centerline Convo pro: 15x4
Rear tires: M/T slicks 28x9
Rear wheels: Centerline Convo pro 15x8
Front suspension information:custom home made. similar to stock. but shock towers removed. w/Afco single adjustable shocks.
Rear suspension information: 2" leaf springs with home made Caltrac style bars. poly spring bushings. Caltrac single adjustable shocks.
Ready-to-race vehicle weight, including driver:3560 lbs, fiberglass bumpers, fenders and deck lid.