Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Heo

Pages: 1 ... 198 199 [200] 201 202 ... 220
2986
Non-FE Discussion Forum / Re: block
« on: February 20, 2014, 06:34:30 PM »
A friend is building one with four weber DCOE s on a crossram intake
raised exhaust ports and a roller cam  for a Mustang but his buissnes is taking
up to much of his time so progress is slow
Interesting to se how it works out

2987
Non-FE Discussion Forum / Re: block
« on: February 20, 2014, 04:07:06 PM »
Missed a shift and left the scale on the tach :-[(8k)
and it stayed together. But i dont Think it will like it
for a whole day ;D
You got smaller dia.crank bearing so you can spin
the crank faster theoretical than a Windsor
Today i realy dont know with new parts availibel????
Havent built an Engine since the 80s
There was a mustang around here they said he
reved 9500-10000 through the traps if its true i dont know
but that Cleveland realy liked to rev.
it was the whole deal with portplates on the exhaust side
rumored to be an old Prostock engine

2988
Non-FE Discussion Forum / Re: block
« on: February 19, 2014, 12:03:14 PM »
I prefer the CL over the w too. Better heads
better bottom end no messing with water
when you swap intake
Think if ford had killed the springtowers
and continued with the CL and made better
exhaust ports and continued to develope it
20 more years instead of the Windsor
Where had we standed today both with factory
and aftermarket parts

Naaa lets scrap this 4 years old modern design...
Or wait!! Lets send it to the underside of the eart
and continue with this 50s design ::)

2989
Non-FE Discussion Forum / Re: block
« on: February 19, 2014, 02:29:20 AM »
I dont understand why ford killed the
Cleveland and continued to make the
Windsor ???

2990
FE Technical Forum / Re: Toploader question
« on: February 19, 2014, 12:52:01 AM »
Can anyone tell me if you have to cut the
floor in a 64 Galaxie to fit a tko trans

2991
Non-FE Discussion Forum / Re: block
« on: February 19, 2014, 12:44:54 AM »
Yes there is material to drill for four bolt caps.
And if you build it get a cam with a Cleveland
grind and not with some Chevy grind.
Relativly easy to get 400 hp with 2v heads
I dont know how it is today but in the 80s
people was afraid of 4v heads so they was
almost free. Contrary to their rumor to not
work on the street they do if you dont go
to wild on the duration. They make Power
anyway

2992
Member Projects / Re: 390 pump gas deal
« on: February 17, 2014, 05:20:00 PM »
How is this for insane :o :ohttp://www.youtube.com/watch?v=ChRauhJk8Q8
125 mph on a riding mower on ice

2993
Member Projects / Re: 390 pump gas deal
« on: February 17, 2014, 05:09:17 PM »
http://www.youtube.com/watch?v=b6hoLDHxoy0

landspeed racing on ice in Sweden

2994
Non-FE Discussion Forum / Re: block
« on: February 17, 2014, 04:57:44 PM »
Nice find. I like the Cleveland engines

2995
Non-FE Discussion Forum / Re: Cosworth BDA
« on: February 17, 2014, 11:28:24 AM »
Thats why they drink warm beer
Lucas make the refridgerators

2996
FE Technical Forum / Re: Front wheels
« on: February 16, 2014, 09:15:30 PM »
185-70 15 i Think. Its about the same diameter as a
165 15
Or you can go 185 15 thats about one inch bigger
in dia.

2997
FE Technical Forum / Re: Front wheels
« on: February 16, 2014, 03:23:54 PM »
I have run a 66 Fairlane with FE and 165-15 with no
problem except a litle bit understear

2998
Non-FE Discussion Forum / Re: Cosworth BDA
« on: February 14, 2014, 11:49:01 PM »
Oh yes the Cosworth V8s.Whats up with the Brits
The cant build a regular familysedan or even a
bicycle thats not junk. But formula one Engines
and chassies and fighterplanes and such
they are among the best :o :o :o

2999
Non-FE Discussion Forum / Re: Cosworth BDA
« on: February 14, 2014, 11:40:42 PM »
Cool video, I'm a junkie for the sound of a srcreamin motor.
Here is a link to my favorite Cosworth. Hot Rod did a write up on the build years ago.

https://www.youtube.com/watch?v=iFSGSL3Nrmc

Added Hot Rod link
http://www.hotrod.com/featuredvehicles/hrdp_0803w_1929_model_a_touring_car/

Yes As much as i like fullsize american cars. There is not much
that makes you feel alive like some fast laps on a gravelroad
through to Woods.
When i had the 65 Mustang my friend told me.
Just beacuse it has a rallypac dont mean its a
Rallycar ;D ;D. It was a real fun car on gravelroads
with shelby springs and koni shocks

That model A is an amasing build. First time i saw it
i thought that strange?. Model A never had Wood Wheels.
But they actualy cast Aluminium Wheels that they woodgrained
I saw a video of the build they realy made o lot of work to
make it look like a stock Model A. But most of the car is
reconstrukted.
Its built in Finlad not that far from where i live


3000
Non-FE Discussion Forum / Cosworth BDA
« on: February 13, 2014, 09:41:01 PM »
https://www.youtube.com/watch?v=cf_NH8yoCgY
Not an fe but a ford Cosworth BDA must be the
best sounding 4 cyl Engine..only 1600 cc and
make all that noice

Pages: 1 ... 198 199 [200] 201 202 ... 220