Dennis, if you ever need to talk clutch, I'll be glad to help however I can.
Well, pistons are here. Did a quick weight check and they are too dead on from my previous pistons that a balance is not needed.
The heads went off to Fox Lake. What I'm getting is they will be in the 360 range when done. About 60 increase from before when they were only hand ported back when I purchased them.
We're going to up the camshaft just slightly, just to help but not increase my RPM band horribly. I don't want to turn this over 6500. That was peak HP on the 462ci.
They are fitting clearances Clarence, roger Roger, what's our vector Victor....................oh, um, okay, back on track
Crank and rods getting magged.
I'll finish up some block detailing this weekend. Then fit rings, etc, etc, etc. I have high hopes for it to be together by mid August.