FE Power Forums
FE Power Forums => Non-FE Discussion Forum => Topic started by: Dan859 on April 04, 2020, 12:10:00 PM
-
Hi Everyone,
I'm looking for input on a new clutch for my 66 Fairlane. It's a Ford Motorsports 351 block, 393 CID. It dynoed 376 HP at the rear wheels, so I'm figuring about 425 HP at the flywheel. Transmission is a TKO 600, rear end is a 9 inch with 3.75 posi gears. The car is street driven, but I might take it to the track once, just to run it and get some time slips. I would appreciate any suggestions for a new clutch, and maybe a flywheel if I end up needing one. Thanks in advance.
Dan
-
Which bellhousing and which pattern does your flywheel have?
If you can run an 11” Long, I’d run a RAM 88769HDT.
-
It's a quicktime bellhousing, but I don't have it apart yet, so I don't know what the pattern is.