Ford FE c6 help !

[bartlett]

Thanks drew, I may need a few parts..

I also think I found another issue. I took the valve body apart and when I separated the half one spring didn't have a check ball on it. It was just a spring sticking up. That just didn't seem right

[bartlett]

Anyone have a hookup for broader transmissions? I'm thinking of just buying a wide ratio c6 from them

[kwood]

I bought a AOD with the FE bell housing modification from Jay at Broader. Great guy to deal with but he is a small shop so like others in the FE world he is stretched thin. He will be upfront with a delivery date but it may not be a two day turn around....

[Drew Pojedinec]

Just call him Bartlett:
http://www.broaderperformance.com/  number is on his webpage.

[bartlett]

Guy never answers his phone. I've called about ten times. Guess ill go a different direction.

[bartlett]

Left messages and tried to call a few more times. Never answers. Don't know if he's out of town or deaf. So today it got delivered to tsi in burnsville to Dewayne. He has a good reputation for ford transmissions. I won't be getting the wide ratio but it will be done wed next week..

[BigNate]

Guy never answers his phone. I've called about ten times. Guess ill go a different direction.

That's odd... I bought some parts from him a while ago and he was very good / responsive...  you might check the ford transmissions forum...  http://www.network54.com/Forum/260730/

[bartlett]

Yea trust me I was ready to pull the trigger on his 700hp wide ratio c6. He don't list this trans for a fe on his site to just order it. I tried.

[bartlett]

Got the trans back and installed. Shifts awesome manualy but to quick if left in drive.  Figure I need to adjust the module.   Thanks for all the help

[jayb]

Did the trans guy say what was wrong with it when he got it?  I'm kind of curious about what failed...

[bartlett]

Yes he said the broken top and bottom plate is what caused the flare...

[bartlett]

Took about 6 turns in on the modulator to get the shift points right for driving in D. (screw in mod with white stripe.) Very happy with the trans. it works great and shifts as I think it should.  Dewayne at tsi in Burnsville built it for me. If your local to the twin cities give him a try.