16
FE Technical Forum / Re: 6090 N heads worth
« on: December 27, 2023, 11:26:54 AM »Those heads might be worth that if they were pertinent to the original, first 135 CJ cars.
The 135 cars were built before N heads, they had C8AE-J heads
Dedicated to Building and Racing the Ford FE Engine
News:
SMF - Just Installed!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
The 135 cars were built before N heads, they had C8AE-J heads
17
FE Technical Forum / Re: 6090 N heads worth
« on: December 27, 2023, 09:48:12 AM »
The date codes and obviously the condition set the value. If these are not desirable dates and good condition somewhere around or under $1500. If they are early 68 dates and good condition his $2000 is not out of question.
18
FE Technical Forum / Re: Fan shroud for 63 Galaxie 427
« on: December 26, 2023, 08:29:38 PM »
If it fits a 352 or 390 car then it will fit a 427 car. But you mentioned correct, and they will not be correct because 427 cars did not have A/C.
19
FE Technical Forum / Re: Fan shroud for 63 Galaxie 427
« on: December 26, 2023, 07:27:30 PM »
If I am not mistaken, the only Galaxie's that had the shroud was A/C cars in 63.
The bottom half has long brackets that go back and mount on the same bolts for the bottom of the radiator. They bolt together in the center, but I can't remember how the top is attached.
The bottom half has long brackets that go back and mount on the same bolts for the bottom of the radiator. They bolt together in the center, but I can't remember how the top is attached.
20
FE Technical Forum / Re: transmission options
« on: December 23, 2023, 07:55:43 PM »
Looks like they are offering a short shaft kit to work with a FE bellhousing for the TKX now, Tremec part TCKT18210.
21
FE Technical Forum / Re: C6 calibration
« on: November 28, 2023, 08:57:35 AM »
See if this helps...
https://www.428cobrajet.org/speedo-calc
https://www.428cobrajet.org/speedo-calc
22
Private Classifieds / Re: Ford and FE parts
« on: November 26, 2023, 07:35:41 PM »
It was busy in the one building for about half the day, but after lunch the crowd decreased dramatically. So the decline is continuing in my opinion and I guess blame to go around. You have to support things you want to last, but with the prices you see there for most items, the lure of finding that part you need at a reasonable price is long gone. There are a few vendors that you can still get a decent deal from and we always seem to find something we want. But my expectations aren't too high for the decline to halt anytime soon.
24
FE Technical Forum / Re: Woe is me, or did my project just grow up?
« on: October 30, 2023, 11:12:36 AM »
Easy decision. Plus the value and awe factor it adds to the car.
25
Private Classifieds / Re: Vintage Hurst comp+ shifter for toploader
« on: October 03, 2023, 06:16:18 AM »
Mark it looks like a factory 70 Mustang or Torino to me.
26
Member Projects / Re: Putting A Little Pep In My 390's Step
« on: September 11, 2023, 09:34:11 PM »
Awesome job!
27
Non-FE Discussion Forum / Re: Not Sure About This: 67 Cougar Fastback (not mine)
« on: September 07, 2023, 01:33:54 PM »
There was a similar one listed last November in Cincy, but for only $4500. It appeared they had used Fairlane/Torino fastback metal on it that was red and white, so may not be the same one. I have to admit the one last year looked pretty good. Not sure what the custom interior would cost to finish it out, though.
28
Member Projects / Re: 1964 Comet Blown injected Cammer
« on: September 07, 2023, 10:25:52 AM »
Well deserved!
29
Private Classifieds / Re: In need of aftermarket 427 block
« on: September 06, 2023, 03:34:42 PM »
Here is one from a forum member on here.
https://brunsonperformance.com/product/shelby-aluminum-sohc-block/
https://brunsonperformance.com/product/shelby-aluminum-sohc-block/
30
Private Classifieds / Re: Some FE stuff, that can be delivered to FERR
« on: September 04, 2023, 07:13:37 AM »
Rory, can't make it to the reunion but would take the carbs and heads if we could work out something. What route do you take to get to the FE Reunion?