FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: olman on January 24, 2020, 06:33:34 PM

Title: FLOOR PLUG
Post by: olman on January 24, 2020, 06:33:34 PM

 I'm looking for a supplier that may have the oval floor plug that goes on the right side of the trans hump in my 63 1/2 galaxie 500 XL. I have looked at Buds classic cars Macs  and  Concours parts.
 Any info would be appreciated.

Title: Re: FLOOR PLUG
Post by: 1964Fastback on January 24, 2020, 06:51:39 PM

This?

http://www.autometaldirect.com/amd-floor-pan-plug-63-64-ford-galaxie-66-69-fairlane-68-69-torino-p-19010.html

You didn't specify size or material (rubber, metal).

Pat

Title: Re: FLOOR PLUG
Post by: olman on January 24, 2020, 11:55:38 PM

This plug is hard rubber like the rubber plugs in the floor. It is 2 1/4 X 1 3/4 inches and oval shaped. located on the right side of the trans hump toward where the tranny would be bolting to the bellhousing. what was there was a piece of 30lb roofing felt glued to the trans hump. Just thought I might find the correct piece that goes there before putting my soundproofing down and new carpeting..

Title: Re: FLOOR PLUG
Post by: 67428GT500 on January 25, 2020, 12:56:34 AM

That plug looks a lot like the Mustang rear shock bolt access covers. You might have a look at one of those.

                                                       -Keith

Title: Re: FLOOR PLUG
Post by: olman on January 25, 2020, 01:40:49 PM

Thanks Keith, I'll order the pair only $6 and looks to be what I need.