Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - shady

Pages: 1 2 [3] 4 5 ... 68
31
FE Technical Forum / Re: Identify headers?
« on: August 16, 2023, 02:34:20 PM »
My guess is that they are Chinese Sanderson rip offs. They were floating around e-bay for a while selling for $150 . They never claimed what they fit other than a FE. Sanderson's have their name on them and they actually fit.

32
Non-FE Discussion Forum / Re: Fe Reunion
« on: August 01, 2023, 11:50:18 AM »
I was at every one but the first and it's been a nice crowd at them all. It's a great event that is run right.

33
Non-FE Discussion Forum / Re: Fe Reunion
« on: July 31, 2023, 09:20:50 AM »
I need a new hat, so the pressures on.

34
FE Technical Forum / Re: 7 Litre Driveshaft
« on: July 16, 2023, 01:12:06 PM »
I had a 64 with a t-10 that had one of those. I assumed it was to kill noise from clutch loading and drive line harmonics coming back through the shifter handle. Always wanted to cut one apart to see how it was constructed. GM had a service bulletin where on manual transmissions if a customer complained about noisy trans. they would fill the drive shaft with expandable foam insulation. Real problem was weak clutch disc hub springs.

35
FE Technical Forum / Re: Worst FE article I’ve seen
« on: July 09, 2023, 02:38:04 PM »
Just a bunch of college guys trying to get something going on. I'll give them credit for that. If they take advice from people in the know, good for them. If not, it's the internet, purveyor of bad advice, no matter what your looking at.

36
FE Technical Forum / Re: R-Code Galaxie Air Filters
« on: June 14, 2023, 09:54:16 AM »
Doesn't our Galaxie trunk lids make for an excellent work table. Nice filters BTW.

37
FE Technical Forum / Re: Autolite 4100 carburetor sticky secondaries
« on: June 01, 2023, 06:59:37 AM »
If it operates freely with the engine not running it is ok. With the engine running, vacuum holds it closed until the primaries are at wide open, then the secondaries are easy to open. I think you're looking for a problem that doesn't exist. BTW with a properly operating vacuum secondary carb. you will hardly feel the secondaries open. Just seems like one big 2bbl.

38
Non-FE Discussion Forum / Re: The new for 2023 Ford Turbocharged 406 cu in V-8 Hot Rod Pickup
« on: May 01, 2023, 02:44:02 PM »
must be a very short order list. price of diesel may be scaring people away. you did good.

39
FE Technical Forum / Re: Grill Emblem
« on: April 28, 2023, 09:38:12 AM »
wagon train

40
FE Technical Forum / Re: Grill Emblem
« on: April 26, 2023, 03:37:40 PM »
The California look.

41
Non-FE Discussion Forum / Re: Console color change
« on: April 16, 2023, 01:25:52 PM »
I used SEM but you are limited to color selection. You could try acrylic enamel with a flex agent like they use in bumper covers.

42
Non-FE Discussion Forum / Re: Throwback Pulling Truck pictures
« on: February 23, 2023, 01:21:21 PM »
Quote from: e philpott on November 06, 2018, 05:40:44 PM
great pictures !! Cool 4x4 Pinto in the background with a spare tire on the roof .lol
[/quote Yeah, probably an old rusty Bronco gave up its frame and body to the pinto. Today the Pinto is worth about 1k. That Bronco about 60k. Never saw that coming.]

43
Non-FE Discussion Forum / Re: way back when
« on: December 26, 2022, 10:26:18 AM »
yep, the caddy's in the video.

44
FE Technical Forum / Re: Slow site
« on: November 13, 2022, 01:45:06 PM »
same slow down on 3 different computers and 2 phones. just within the last two weeks here.

45
Non-FE Discussion Forum / Interesting weight charts.
« on: November 07, 2022, 08:15:28 AM »
in case you were ever wondering

https://bangshift.com/bangshift1320/ridetech-vehicle-weight-database/

Pages: 1 2 [3] 4 5 ... 68