FE Power Forums

FE Power Forums => FE Technical Forum => Topic started by: cattleFEeder on October 22, 2019, 06:48:09 AM

Title: Jegs rocker arms
Post by: cattleFEeder on October 22, 2019, 06:48:09 AM

Never known these were available, I would rather use Brents rockers but an option if your on a budget.
https://www.jegs.com/i/JEGS/555/20199/10002/-1

Title: Re: Jegs rocker arms
Post by: mike7570 on October 22, 2019, 03:08:20 PM

Look just like these "Made in China"

https://www.ebay.com/itm/FORD-FE-ADJUSTABLE-ROCKER-ARM-SHAFT-ASSEMBLY-FORD-FE-352-360-390-410-427-428-CJ/143332431548?hash=item215f4756bc:g:KYUAAOSwRYNb7di5:sc:FedExHomeDelivery!92868!US!-1

Title: Re: Jegs rocker arms
Post by: cattleFEeder on October 22, 2019, 04:43:22 PM

At that price you had to guess the big C was probably where they are made.

Title: Re: Jegs rocker arms
Post by: 427mach1 on October 22, 2019, 07:54:33 PM

I wouldn't use the stock-style adjustable rockers on anything other than a stock cam and springs.  If they are made in China, I wouldn't use them on anything, period.  I've broken too many (one) and learned my lesson!

Title: Re: Jegs rocker arms
Post by: Drew Pojedinec on October 22, 2019, 08:57:14 PM

Quote from: 427mach1 on October 22, 2019, 07:54:33 PM

I wouldn't use the stock-style adjustable rockers on anything other than a stock cam and springs.

I run stock adjustables with end stands. I certainly do not run a stock cam or springs.

Title: Re: Jegs rocker arms
Post by: Rory428 on October 22, 2019, 11:43:15 PM

I have also ran factory Ford adjustable iron rockers with Oregon Cams end support kit with .680" lift solid lifter cams, and I never broke a rocker arm. Without a valve end roller, larger cams can cause more side loading on the valve guides, but for moderate lift cams, not really a big concern.