O-K, changed my mind again. It was difficult to find a machine shop nearby that did line honing. So I was going to use the Cleveland x1 bearings. But, a few minutes ago a guy that I called returned my call. He is the guy that these machine shops send their line honing to. Very nice guy, we talked for a bit. I will be taking the block to him to touch up after checking a few more things. With that, another set of main bearings is on the way. He was iffy on touching up the main bores and using bearings that might be over crushed. I just ordered them as spending 68 bucks seemed way better than my visions of dealing with a spun bearing if something didn't go so well.
So far, 4 is the magic number. 4 sets of main bearings and 4 sets of rod bearings. With shipping costs I'm probably around the 650 mark for bearings. Well, I have some for next time.