FE Power Forums
FE Power Forums => Private Classifieds => Topic started by: winr1 on November 11, 2018, 08:00:26 PM
-
(https://i.postimg.cc/JzXBwMbx/thumbnail-1.jpg) (https://postimages.org/)
(https://i.postimg.cc/tTq1V68v/thumbnail-2.jpg) (https://postimages.org/)
(https://i.postimg.cc/L57h7b5G/thumbnail-3.jpg) (https://postimages.org/)
(https://i.postimg.cc/mZ6cttjV/thumbnail.jpg) (https://postimages.org/)
He asked me if I could get an idea of what they are going for
He said they came off his 1962 406
The intake and exhaust are on his 62 F100 and he drives on a regular basis
He will be installing a 4 barrel and a 2.70 rear gear in a few months
Ricky.
-
I'm no help on the exhaust.....
If the intake, carbs, air cleaner, linkage, fuel log, etc is all together, that setup is worth $800-$1800 depending on how fast you'd like to sell it.
-
Thanks Drew
Ricky.
-
The shorties , last time I checked were around $5-700 bucks depending on condition.
-
I bought my shorties a couple years ago for $600. I then had them surfaced and ceramic coated. The coating was about $200. and was done by Performance Coatings in WA.
-
I might be interested in those shorties, depending on what he ends up asking for them.
-
Thanks guys
The shorties are in very nice condition
He is finishing up an 83 Bronco then he will swap out the intake/exhaust
He may let me swap intakes and exhaust, will ask him
Ricky.
-
What’s the location?
-
Pearland, Texas
Ricky.
-
I don’t know if this is your buddy, but here’s a listing for shorty cast iron headers in Pearland.
https://houston.craigslist.org/pts/d/ford-fe-2x4-intake-canton-pan/6735327695.html (https://houston.craigslist.org/pts/d/ford-fe-2x4-intake-canton-pan/6735327695.html)