Wow nice car, I have a 64 Galaxie with a cammer I love these cars they look like there fast sitting still, this should have been a production car with this motor it is like it belongs in it.

I used a 4.375 in my 391 block that I made my SOHC motor, it worked fine. I built another motor for a friend of mine and ordered the wrong steel crank 4.375 still have it never used, going to sell it if interested ?

Randy

Jay I think it would be really cool if you started selling a complete kit you have always been my go to guy for questions anyway and I always tell my wife it was because of you that I built mine hahahahah. A complete kit for the price of $10K to $15K would be nice there are ways guys could cheat down the price by using a lot of the parts on the stock 390 crank, rods, oil pump, pan, all depends on how much HP they want to get out of it, the next one I build will be low HP something more street friendly, what I have now is a car I have to drive I can't Cruz in it although I do put a lot of miles on it, it would be fun to have one I can Cruz in and drive a little harder at stop lights when a Chev or Mopar pulls up right now they don't want nothing to do with it There is something about the looks when you go to a show and they here it and you get out and open the hood and guys just stand there and look, we just finished the stroker 390 and we have a lot of $ into that but to each his own poison.

Randy

We have L-60 15 under our cars you could do this pretty ease we just ground off about a 1/4 inch on the inner edge and used 8 inch wheels with a 4 1/2 inch inside off set.

I have 1 in my 64 Galaxie with my Cammer in it, it has held up great I used 3.89 gears but what I did was baught the whole 3rd member it was something like $780.00 complete ready to go. I will probably be putting 1 in my Daughters 72 Dart, they come with the large yoke, don't change it out I did and got on my car and broke my Ujoint leared my lessen

I could take you up on that but it might be better to make a few and have a few spares also, I will stop out some night and see how things are going I would like to see your machine up and running, I think I owe you a case of beer anyway.

Hey guys I was running my car the other day (SOHC) and all of a sudden I heard my rocker was a little noise, I got worried right away and shut it off pulled up a chair and had a beer and thought about it before I took off the valve cover. I got it apart and noticed that one of my adjustment pads was gone, I found both pieces and every thing looked OK but was wondering is this common? I will make a new one and put it back together but I am wondering if I should make all new ones?
I have never asked questions on the sight before but I figure this will reach some of the smartest guys in the motor world.

Thanks
Randy

I would have tied it to the back of the Galaxie and went for a ride to see if he could keep up, then would have had him mounted lol, just kidding. Nice catch.