Barry R ..... do you sell bare Felony heads ??

[winr1]

Can they accept 2.09/1.65 valves ??




Ricky.

[turbohunter]

May I piggyback on to Rickys thread and ask if you sell them ported.

NM
Duh
Did research
Pushed a button found answer
http://www.survivalmotorsports.com/FE-Heads.html

[winr1]

Thanks turbohunter !!



Ricky.

[cattleFEeder]

https://www.ebay.com/itm/Survival-Performance-Cylinder-heads-race-quality-Ford-FE-power-390-427-428/191410097205?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

[winr1]

Thanks CF


I email Barry



Ricky.

[Barry_R]

I used to sell them either bare or assembled.  I have not had any for quite a while.  The Edelbrock foundry has cast me a pretty good quantity, but are sending them to me "raw" since they cannot machine things during the facility move that has been all over the internet.  I am working with a local shop who has a couple Haas four axis to get a program together for machining.  I will likely have the raw castings on site in a week or so (truck freight) but it will be longer for me to do finished and sellable parts.

[plovett]

Barry, do you still have your CNC porting program?   I know your old CNC guy is gone, but what about the program?  I would be interested in some of your heads ported if they would be a significant improvement over my ported Edelbrocks.

thanks,

pl

[Barry_R]

So far I have not had any luck getting the CNC data from the guy - he is understandably pretty frustrated with things.
The gent who developed the port is a friend, and is local, so it can be regenerated and perhaps updated.
Given the other stuff I am doing (shop relocation, rebooting the head program, chasing supply on key parts from vendors), the CNC deal is not at the top of my list right now.