FE Power Forums
FE Power Forums => Private Classifieds => Topic started by: hbstang on March 04, 2020, 06:50:54 PM
-
parts in southern cal.pm for contact.
parts sold.
-
You just saved me $2800.00. I’m in Ma so I can’t buy that block. Thanks and good luck with sales.
JB
-
What is the date code on the 428 block?
-
the 428 engine is a PI block with mildly ported cj heads,hyd roller cam,comp roller rockers, performer rpm intake.it runs really good..dont remember what the date is on the block,but i will check it and post it.
-
I'll take the valve covers. PM sent.
-
more parts added
-
Hi, could you please post a pic or 2 of the 650 carb, is it vacuum sec?? thanks...……..Tom
-
that carb is a double pumper.
-
added moreparts,rockers
-
If you are willing to drive 500 miles surely you would be thrilled to just strap it to a pallet and drive 5 miles to a Fastenal or Trucking terminal? I would think it would sell much quicker.
-
fastenal requires a complete wooden crate enclosure,no pallets.the last time i used them for a transmission it was to go 800 miles,it cost $330 plus $130 crate,and took 3 weeks,as they have no direct route to some places.the offer is mostley intended for the engine and block if bought together.
-
I don't want to speak for your particular Fastenal because I have heard that not all participate in the program. But you can ship on just a pallet they just won't allow you to insure it. Their prices have gone up but still in the 10-25% discount over freight companies and it is a little slower. But it isn't difficult and as long as you are willing to palletize it and drop it off, the rest is up to the buyer. I see large expensive items on ebay go dirt cheap all because the seller is not willing to ship. Offer it up and let the buyer handle it.
-
bump ttt
-
Is the water pump for a FE ?
-
yes,CSR water pump for fe with spacers and bolts.works fine.
-
interested in water pump.. do you take paypal
-
sent you a pm.
-
Looking at it how do you bolt the alternator in ? I have a “new” 140 amp alternator to run all the electronics in my car. And also really can’t move the altdue to the turbo’s
-
this is what i did.my own mount.
-
new parts added.
-
Do you still have the Romac damper? Thx. Bob.
-
Message sent on ROMAC dampener
-
Do you still have the Romac damper? Thx. Bob.
yes,still have it.i sent you a pm.dan.
-
Did you get my PM and /or email on the Romac dampener?
-
yes,rcianci was first on pm and posting.
-
So, sold?
-
romac sold.
-
Set 2 PMs