« previous next »
Pages: [1]

Author Topic: SBF scattershield bellhousing Identification  (Read 1971 times)

0 Members and 1 Guest are viewing this topic.

KjcfeF100

  • Jr. Member
  • **
  • Posts: 64
    • View Profile
SBF scattershield bellhousing Identification
« on: November 21, 2019, 07:07:37 PM »
Could anyone here confirm whether or not this is an early version of a SBF 302, 351 Lakewood bellhousing?  Or is it possibly by another company other than Lakewood, it's evidently more than 30 years old?


Logged

BattlestarGalactic

  • Hero Member
  • *****
  • Posts: 1296
    • View Profile
Re: SBF scattershield bellhousing Identification
« Reply #1 on: November 21, 2019, 09:19:21 PM »
Something odd.  Why so many block mounting holes??  Sure that is not an early conversion Bell?
Logged
Larry

KjcfeF100

  • Jr. Member
  • **
  • Posts: 64
    • View Profile
Re: SBF scattershield bellhousing Identification
« Reply #2 on: November 21, 2019, 10:17:52 PM »
Not sure, I'm hoping someone will recognize it.  It's pitched in an ad as just an old Lakewood for SBF, but the bolt hole arrangement does seem odd.
Logged

machoneman

  • Hero Member
  • *****
  • Posts: 3854
    • View Profile
Re: SBF scattershield bellhousing Identification
« Reply #3 on: November 22, 2019, 09:55:31 AM »
Not a Lakewood bell per the pic below. Note the flat 'top' to the bell and the lack of so, so many mounting holes. Bet (a poor guess) it's Ansen or some other make.

https://www.holley.com/products/drivetrain/bellhousings/parts/15200
Logged
Bob Maag

gt350hr

  • Hero Member
  • *****
  • Posts: 941
    • View Profile
Re: SBF scattershield bellhousing Identification
« Reply #4 on: November 22, 2019, 12:02:49 PM »
   Second generation Lakewood after the outer containment  bolts were added.  The latest version Bob posted dropped the upper bolt.
Logged

machoneman

  • Hero Member
  • *****
  • Posts: 3854
    • View Profile
Re: SBF scattershield bellhousing Identification
« Reply #5 on: November 22, 2019, 04:28:12 PM »
On second thought, I swear it looks more like a first Gen. SBC bell (knew the pointy top looked familiar) :

https://www.jegs.com/i/Lakewood/620/15000LKW/10002/-1?gclid=EAIaIQobChMIpJPZ2uD-5QIVi4bACh0g5Q80EAQYASABEgKD__D_BwE

I wonder if the extra block holes were due to a switch in use?
« Last Edit: November 22, 2019, 04:29:57 PM by machoneman »
Logged
Bob Maag

BattlestarGalactic

  • Hero Member
  • *****
  • Posts: 1296
    • View Profile
Re: SBF scattershield bellhousing Identification
« Reply #6 on: November 22, 2019, 05:06:49 PM »
Chevy with a Ford starter pocket??  Interesting.

I think all the extra holes around the top are containment bolts.
Logged
Larry

cammerfe

  • Hero Member
  • *****
  • Posts: 1660
    • View Profile
Re: SBF scattershield bellhousing Identification
« Reply #7 on: November 22, 2019, 09:51:31 PM »
Early SBF blocks only had 5 bolts; then FoMoCo went to six. Might the can shown be for all SBFs?

KS
Logged

machoneman

  • Hero Member
  • *****
  • Posts: 3854
    • View Profile
Re: SBF scattershield bellhousing Identification
« Reply #8 on: November 23, 2019, 11:44:52 AM »
Quote from: cammerfe on November 22, 2019, 09:51:31 PM
Early SBF blocks only had 5 bolts; then FoMoCo went to six. Might the can shown be for all SBFs?

KS

It could be just that yet I've never seen one like that, given the holes were made at the bell's manufacturing plant and not by say a racer's shop. Only way to tell is if our poster can give us the c-to-c measurements of the six-bolt holes for comparison to SBF block holes.
Logged
Bob Maag

KjcfeF100

  • Jr. Member
  • **
  • Posts: 64
    • View Profile
Re: SBF scattershield bellhousing Identification
« Reply #9 on: November 23, 2019, 01:23:05 PM »
Thanks all for the input. I'm not in possession of the b.housing, but considering buying it. It's pitched as a 6 bolt SBF by the seller, it's just so odd looking I wanted to try to confirm what it is first. My internet searches haven't helped much on this one.
Logged
Pages: [1]
« previous next »