FE Power Forums
FE Power Forums => Member Projects => Topic started by: centredautomag on March 02, 2019, 03:57:37 PM
-
we started the engine this morning , all is good here is the you tube link , https://youtu.be/MuUW2g17E1o
-
Sounds great.
-
Sounds a little rougher than the 243in 249ex at.050 580 lift cam at 482ci that you mentioned to me :P
Good job, first runs are always stressful, good thing you took a video of it, it's nice for review.
-
I just put the carbs from my tunnel ram cleveland on and din't touch them. Engine going great.
Had a chance to try a set of cast Alu. Baldy valves covers that I am working on,look good and fit
all right but still need work.
-
Good sounding motor. I noticed the custom valve covers right away. What's the story on them?
-
I am working on those when I have some time.They era cast Alu.baldy's that are close to 1/2 inch higher than original ones ,but they don't fit the way I want so need to modify tooling and try another set,I'll make a new post with photo as soon as we get a set to fit ok.
Thanks Marc.
-
Are the baldy's a product you plan on selling, or is it purely for yourself?
I am working on those when I have some time.They era cast Alu.baldy's that are close to 1/2 inch higher than original ones ,but they don't fit the way I want so need to modify tooling and try another set,I'll make a new post with photo as soon as we get a set to fit ok.
Thanks Marc.
-
If I can get them to fit like they should I'll make them available.
Thanks.
-
I would buy cast Baldie covers.
-
I'm interested too. Do you have a time line in mind?
If I can get them to fit like they should I'll make them available.
Thanks.
-
I hope to have a set made before the fe reunion to bring over to show people and then offer some for sale.
Marc.