The CalTracs would not fit so we had to trim the bracket.
We put it on the ground and found out the other side was in a bind. Months went by then finally we took it apart and modified the frame rail.
This was inside the frame rail
Brian made a patch
I started out this was going to be a race car than I changed my mind and it was going to be a street car so I sprayed the bottom with SPI bedliner. Changed my mind again after talking to Steve Baur the editor of Modified Mustangs and Fords Magazine since he wanted to do a series of Drag Racing related stories. I will leave it on there it can't weight that much. Now it is time to paint the car so we can start putting it together.
Ready for another round of primer
Sprayed a couple of coats of SPI white epoxy to make the red pop.
After a lot of wet sanding sprayed 3 coats of SPI Red the next day 3 coats of SPI Universal clear.