Rory, Randy and Joe. Thank you again. I am lessening closely.
Joe, where might I find one of the Parker Funnel Webs? I'll see if I can find the TF and check it out, too.
Randy, I still want to stick with flat tops (I already have them) but, I'll reduce the combustion chamber to 50cc, giving 10.7/1 static & 8.09 Dyna, I'm at 1400 ft elev and want to run pump gas.
Regarding the chamber reduction, I can angle mill the chambers 1 deg, while doing that. Is there any reason not to?
My planed deck clearance is .005 (8.200 Deck) I could go to .000, if it would give a noticeable boost.
Rory, I'm very encouraged with what your doing with the 331 and would be grateful, to be kept informed.