Author Topic: Cam bearing usage on 427 marine block. (Read 1482 times)

GJCAT427 · « **on:** November 23, 2018, 03:55:12 PM »

The block I got last summer is a marine block not drilled side oiler core. Which cam bearings would be correct for it? Std 390 hydro or 427 side oilers. When I got it the block had been tanked and oiled. Getting ready for assy and running a factory solid lifter cam. Barry, Brent or Blair?

blykins · « **Reply #1 on:** November 23, 2018, 05:32:47 PM »

Are the cam bearing bores in the block grooved?

CaptCobrajet · « **Reply #2 on:** November 23, 2018, 05:48:56 PM »

F33 Durabond.

GJCAT427 · « **Reply #3 on:** November 23, 2018, 06:33:19 PM »

Brent, yes the bores are grooved. Lifters were solids and the oil passages are not drilled. Blair I`ve been trying to get in touch with you, but the phone says message box is full. Garry

blykins · « **Reply #4 on:** November 23, 2018, 06:42:59 PM »

Quote from: GJCAT427 on November 23, 2018, 06:33:19 PM

Brent, yes the bores are grooved. Lifters were solids and the oil passages are not drilled. Blair I`ve been trying to get in touch with you, but the phone says message box is full. Garry

I was just making sure, but Blair beat me to it.

GJCAT427 · « **Reply #5 on:** November 23, 2018, 06:50:14 PM »

Thanks guys Garry

News:

Author Topic: Cam bearing usage on 427 marine block. (Read 1482 times)

GJCAT427

Cam bearing usage on 427 marine block.

blykins

Re: Cam bearing usage on 427 marine block.

CaptCobrajet

Re: Cam bearing usage on 427 marine block.

GJCAT427

Re: Cam bearing usage on 427 marine block.

blykins

Re: Cam bearing usage on 427 marine block.

GJCAT427

Re: Cam bearing usage on 427 marine block.