Looking for a dual groove generator pulley for a 63 Galaxie FE application. This pulley would be what comes on the generator for a 63-64 with air and power steering. Pulley size is about 3 1/8” OD with a 5/8”hole for the shaft, the hole would also be machined for a woodruff key. Anyone got one of these laying around?
For lack of finding the correct pulley looking for a good source for an aftermarket pulley that would work. I looked at Summit, they have lots of dual groove alternator pulleys, largest diameter was only about 2 5/8” and I don’t think any had a woodruff key. How important is the woodruff key on the generator if alternators get by without them?