FE Power Forums
FE Power Forums => FE Technical Forum => Topic started by: 64PI on March 21, 2019, 06:35:07 PM
-
I have a set of JE super stock legal 390 pistons. I bought them used and I am trying to get a set of rings for them.
-The top ring is a Dykes style ring that measures. .062" (1/16").
-The second is a low tension conventional style ring that measures. .077"... So 5/64" or 2mm?
-Oil ring is a standard 3/16"
-Bore is 4.090"
I would like to stay with the Dykes style low tension ring combo.
Any help is appreciated!
Fred
-
Hastings rings will help you out
-
Call Keith at Total Seal. You will need to give him all dimensions including the depths so he can fix you up. You may be able to run a spacer and some thinner rings as well.
-
Total seal is going to help me out. Thanks guys.